Hyper cardioid frequency response 40hz 16khz output
Listado hyper cardioid frequency response 40hz 16khz output
-
4vrms (for full rated power at 4 ohms) frequency response (at 1w, 20 hz - 20 khz) + 0 db, -1 db signal to noise ratio (a-weighted) >103 db (rated as dbr to full rated 8 ohm power output) intermodulation distortion (60 hz and 7 khz at 4:1, from full rated output to -30 db) damping factor (8 ohms, 10 hz to 400 hz) >200 crosstalk (below rated power) 20 hz to 1 khz >85 db, >55 db input impedance (nominal) 20k ohms balanced, 10k ohms unbalanced load impedance 2 to 8 ohms per channel in stereo, 4 to 8 ohms in bridge mono ac line voltage and frequency configurations available (+/- vac 60 hz, 100 vac hz, 220 and 240vac 50 hz dimensions 19" x 39 kg) shipping weight 132 kg) iec power connector 15a thd > 05% somos tienda fisica en san crsitobalspecifications sensitivity 1
-
4vrms (for full rated power at 4 ohms) frequency response (at 1w, 20 hz - 20 khz) + 0 db, -1 db signal to noise ratio (a-weighted) >103 db (rated as dbr to full rated 8 ohm power output) intermodulation distortion (60 hz and 7 khz at 4:1, from full rated output to -30 db) damping factor (8 ohms, 10 hz to 400 hz) >200 crosstalk (below rated power) 20 hz to 1 khz >85 db, >55 db input impedance (nominal) 20k ohms balanced, 10k ohms unbalanced load impedance 2 to 8 ohms per channel in stereo, 4 to 8 ohms in bridge mono ac line voltage and frequency configurations available (+/- vac 60 hz, 100 vac hz, 220 and 240vac 50 hz dimensions 19" x 39 kg) shipping weight 155% somos tienda fisica en san cristobal tariba haga sus preguntas antes de ofertar el precio es en disney1 kg) iec power connector 15a thd > 0
-
frequency response: 56hz-22khz crossover frequency: 3 khz low-frequency amplifier power: 40 watts high-frequency amplifier power: 30 watts maximum signal-to-noise (dynamic range): > 100 db (typical a-weighted) polarity: positive signal at + input produce outward lf cone displacement input impedance: 20 k ohms balanced, 10 k ohms unbalanced input sensitivity: 85 mv pink noise input produces 90 dba output spl at one meter with volume control at maximum power: factory programmed for either 115v ~ hz or 230v ~ hz protection: rf interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse cabinet: vinyl-laminated mdf size: 72cm weight: 11 lbssomos tienda fisica estamos a su orden tenemos punto de venta7” x 7” x cm x 17
-
frequency response: 56hz-22khz crossover frequency: 3 khz low-frequency amplifier power: 40 watts high-frequency amplifier power: 30 watts maximum signal-to-noise (dynamic range): > 100 db (typical a-weighted) polarity: positive signal at + input produce outward lf cone displacement input impedance: 20 k ohms balanced, 10 k ohms unbalanced input sensitivity: 85 mv pink noise input produces 90 dba output spl at one meter with volume control at maximum power: factory programmed for either 115v ~50/60 hz or 230v ~50/60 hz protection: rf interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse cabinet: vinyl-laminated mdf size: 72cm weight: 11 lbs7” x 7” x 10”; 19somos tienda fisica estamos a su orden tenemos punto de venta
Libertador-Aragua (Aragua)
-
25-inch diameter, magnetically shielded with curved cone with high-temperature voice coil hf driver: 1-inch diameter, magnetically shielded silk dome frequency response: 100hz - 20khz (+/-3 db) crossover frequency: 25% distortion input impedance: 10k ohms (unbalanced) input sensitivity: 100mv pink noise input produces 90dba output spl at 1 meter with volume control at maximum protection: rf interference, output current limiting, over temperature, turn on/off transient, subsonic filter indicator: blue power led ring around on/off/volume knob on front panel power requirements: v~hz, v~hz; powered via detachable 2-conductor line cord cabinet: vinyl-laminated mdf dimensions: 7without packing) specifications subject to change without notice100 verdes, usados en perfecto estado specs type: two-way desktop reference monitor lf driver: 33khz dynamic range (maximum signal-to-noise ratio): >80db (typical, a-weighted) input connectors: left and right line input connectors (rca) polarity: positive signal at "+" input produces outward low-frequency cone displacement dynamic power: 10 watts into 4 ohms (per channel) at 0
-
En venta subwoofer marca: bower & wilkins modelo: asw-608 blanco especificaciones drive unit 1x ø200mm (8 in) paper/kevlar® cone long- throw frequency range -6db at 23hz and hz adjustable (eq at a)frequency response ±3db 32hz – hz adjustable (eq at a) bass extension -6db at 23hz (position a), -6db at 28hz (position b), -6db at 36hz (position c) low-pass filter active 4th-order, variable cut-off frequency amplifier power output: 200w rated power consumption: 40w/ 05mm jack) dimensions height: 260mm (102 in) depth: 330mm (13 in) including grille and controls weight: 82 in) no feet width: 260mm (105w standby impedance: 33k? signal/noise: >90db functions: volume level – line in, volume level – speaker in, low- pass filter frequency, low-pass filter bypass (line in only), bass extension, bass roll-off alignment, auto sense on/standby, phase switch inputs: line in (rca phono), speaker in (binding post), 12v trigger (35 lb) impecable estado en su caja original se uso solo para probarlo con todos sus accesorios precio negociable fotos reales entregas personales en altamira y los palos grandes envíos al resto del país por zoom, domesa, tealca y mrw oferte solo si está 100% seguro evite calificaciones negativas garantía: se revisan al momento de la entrega
-
***** descripción del producto ***** unidirectional: cardioid pickup pattern captures source signal such as guitar amplifier or vocalist, while shunning off-axis sound minimizing background noise & feedback reproducing audio without interference from instruments or speakers on stage dynamic: for optimal clarity and punch, robust & resistant to moisture, achieving high gain before feedback, makes this microphone ideal for live vocal applications and for recording amplified instruments ultra-wide frequency response: for brilliant and transparent sound with integrated pop filter and windscreen to minimize breath and pop noises you can count on it to come through after countless gigs and studio applications cable included: professional grade 15 ft***** otras caracteristícas ********** titulo completo ***** micrófono vocal dinámico profesional***** condiciones para la venta ***** 1poseemos tienda física donde puede retirar su compra (cuando se le indique que esta lista para ser retirada)enviamos su compra a cualquier parte del paísa perfect all-purpose, versatile stage and recording microphonexlr-to-1 4 cable suppliedthis pyle pdmic59 is perfect for your bedroom, professional studios and on-stage vocal performances all over the globe high quality: rugged, all-metal construction for maximum reliability featuring a zinc die-cast case and steel mesh windscreen with anti-dent ringtiempo de entrega de 5 días hábiles
-
36" 1 x tweeter driver digital media & network players mplifier output power / total 540 watt amplifier output details output power / channel 180 watt, 90 watt output impedance / channel 3 ohm, 8 ohm frequency response at 1 khz, at 10 khz total harmonic distortion (thd) 10 % channel type main - midrange/tweeter, main - woofer, subwoofer channel qty 1, 2 radio3" 1 x woofer driver - 6general modelo;sa-ak640 type mini system manufacturerpanasonic driver details subwoofer: 1 x subwoofer driver - 6por motivo de viaje vendo mi equipo de sonido panasonic, usado pero en perfectas condiciones, le funciona todo, trae su control y pilas originales panasonic3" 1 x mid-range driver - 2
Libertador-Aragua (Aragua)
-
Características: 200w rms (400w peak) per channel at 8 ohms 300w rms (600w peak) per channel at 4 ohms 600w rms (1200w peak) at 8 ohms bridged bi-polar output stage technology for the finest sound quality and reliability high output power to drive professional loudspeakers without clipping comprehensive protection circuitry with protect led indicator 1/4? trs & xlr balanced/unbalanced inputs speakontm & 1/4? speaker outputs three modes of operation ? stereo parallel mono, and mono bridge ground lift switch decibel (db) level meter with clip leds selectable voltage for worldwide operation dual aluminum extrusion heat sink design with directly mounted output transistors for no-fault operation air guide with front-to-rear airflow and cooling fan for thermal stability and reliability compact 2u well balanced enclosure steel reinforced chassis frequency response of 30hz ? 50 khz signal to noise ratio of 100 db below rated power at 8 ohms amp power ratings are measured using eia standardswith its bi-polar output stage technology and comprehensive protection circuitry to prevent overheating, the gpa series gives you the high-end features you want in a product that is well within your budgetgemini gpa4000 professional power amplifier en muy buenas condicionesgemini's gpa series power amplifiers provide you with excellent value for a wide range of intermediate power applications
Mérida (Mérida)
$ 2
-
frequency response 10hz ~ 50khz ±177v maximum input level 21dbv/9v damping factor (f=1khz 8o) >350 input impedance 20k o fuse 5mm x 20mm ac 115v/230v hz output stereo 8 oohm 2 x 150w rms output stereo 4 oohm 2 x 200w rms output bridged 8 oohm 400w rms dimensions (wxdxh) 19? x 131% input sensitivity 08? x mm x 350mm x 88mm) net weight 19 lbs (85db signal to noise (lf / hf) >90db thd (lf / hf) > 0
-
5 mm mini-jack (1) output terminal: monitor/auxiliary-out, ext speaker output jacks: mon: 34 f: mm lamp: 100 w, 12 v, efp reel capacity: 180 m projection: forward, reverse projection speed: fps, by selector switch film loading: automatic threading sound: magnetic playback on main sound track sound mode: mono amplifier: 1 ic, 12 si transistors and 6 si diodes amplifier output: music power 4 w frequency response: ? sound recording: magnetic recording on main sound track sound-on-sound: and sound fading recording level control: auto and manual input terminal: microphone, auxiliary-in input jacks: 3proyector súper 8 sankyo soundarketed in super 8 mm film lens: sankyo zoom f: 15 mm diameter jack (1) built-in speaker: 10 cm diameter round speaker, 8 ohm built-in film cutter: yes motor: electronically governed dc magnetic motor power source: v ac, hz, 160 w weight: g dimensions: 165 x 234 x 347 mm made in japan by sankyo 5 mm mini-jack, ext sp: 6
-
35 mv), phone (150 mv) input jack: 5-pin din plug (european type) output terminal: external speaker (4 ohm) output jack: 2-pin din built-in speaker: 2 w motor: dc magnetic motor power source: v ac, hz, 200 w weight: g dimensions: 190 (w) x 275 (h) x 295 (l) mm made in italy by silma3 f: mm lamp: 100 w, 12 v, efp projection: forward, reverse projection speed: fps film loading: automatic threading sound: magnetic playback on main sound track sound mode: mono sound controls: volume, sound-on-sound amplifier: transistorized amplifier output: sinus 6 w, power music 8 w frequency response: hz at 18 fps, hz at 24 fps recording: magnetic recording on main track recordinglevel control: auto input terminal: microphone (0marketed in standard 8 mm super 8 mm film format change: by switch lens: will-wetzlar vario-travenon f: 1
-
frequency response40 hz-18khz (-10 db)clip led power led1 x 15” woofer, 2115v / ac / 60 hz19 x 16 x 29 inchescorneta amplificada soundtrack wa-15bt bluetooh, usb, sd, controles bajos,agudos,balance,volumen, aux entrada y salidas cannon click on the big image for more zoom prev next description description 15” abs active speaker cabinet microphone inputspecial function1" titanium diaphragm driverusb, lcd screen, mp3 player & bluetooth120 w rms / 180 watts continuous
-
Amplificador gemini xga- frequency response 10hz ~ 50khz ±177v maximum input level 21dbv/9v damping factor (f=1khz 8o) >350 input impedance 20k o fuse 5mm x 20mm ac 115v/230v hz output stereo 8 o 2 x 90w rms output stereo 4 o 2 x 125w rms output bridged 8 o 250w rms dimensions (wxdxh) 19” x 138” x mm x 350mm x 88mm) net weight 171% input sensitivity 05db signal to noise (lf / hf) >90db thd (lf / hf) > 0
-
frequency response 10hz ~ 50khz ±177v maximum input level 21dbv/9v damping factor (f=1khz 8o) >350 input impedance 20k o fuse 5mm x 20mm ac 115v/230v hz output stereo 8 oohm 2 x 150w rms output stereo 4 oohm 2 x 200w rms output bridged 8 oohm 400w rms dimensions (wxdxh) 19” x 131% input sensitivity 08” x mm x 350mm x 88mm) net weight 19 lbs (85db signal to noise (lf / hf) >90db thd (lf / hf) > 0
-
Acepto dolares o al cambio del dia amplificador de w 400rms a 8ohm frequency response 10hz ~ 50khz ±177v maximum input level 21dbv/9v damping factor (f=1khz 8o) >350 input impedance 20k o fuse 5mm x 20mm ac 115v/230v hz output stereo 8 oohm 2 x 150w rms output stereo 4 oohm 2 x 200w rms output bridged 8 oohm 400w rms dimensions (wxdxh) 19” x 131% input sensitivity 08” x mm x 350mm x 88mm) net weight 19 lbs (85db signal to noise (lf / hf) >90db thd (lf / hf) > 0
-
35 mv), phone (150 mv) input jack: 5-pin din plug (european type) output terminal: external speaker (4 ohm) output jack: 2-pin din built-in speaker: 2 w motor: dc magnetic motor power source: v ac, hz, 200 w weight: g dimensions: 190 (w) x 275 (h) x 295 (l) mm made in italy by silma con cable de encendido y funciona¡3 f: mm lamp: 100 w, 12 v, efp projection: forward, reverse projection speed: fps film loading: automatic threading sound: magnetic playback on main sound track sound mode: mono sound controls: volume, sound-on-sound amplifier: transistorized amplifier output: sinus 6 w, power music 8 w frequency response: hz at 18 fps, hz at 24 fps recording: magnetic recording on main track recordinglevel control: auto input terminal: microphone (0marketed in standard 8 mm super 8 mm film format change: by switch lens: will-wetzlar vario-travenon f: 1
-
5 in) frequency response 55 hz - 300 hz (±3 db) maximum spl 123 db weight 404 kg (89 lb) low frequency driver jbl -g input connectors xlr/m (x2) (line level, balanced)25 in ts phone jack (x1) (speaker level) output connectors xlr/f (x2) (selectable, thru or high pass)specifications ^ power rating 300 w / 500 w frequency range 38 hz - 300 hz (-10 db) dimensions (h x w x d) 597 mm x 516 mm x 597 mm (23powered subwoofer for those who prefer the simplicity of a self-powered subwoofer, there's the jrx118spthis feature allows the jrx118sp to operate in stereo systems using a single subwoofertransferencias banesco mercantil vzla bsfeatures ¿ the rugged enclosure is constructed from 19 mm (integral, preset limiter prevents clipping distortionbuilt-in 500 w (peak), 300 w (continuous) amplifieran integral crossover also provides balanced, line-level, stereo, highpassed outputs to feed powered satellite speakers or an external amplifier for passive satellitescontrols, connectors, and indicators are clearly labeled with large, highcontrast graphics for easy operation in poorly lit environments25 in ts phone jack is provided75 in) mdf (medium density fiberboard) using advanced adhesives and mechanical fastener technology for durability and improved lowfrequency performancea speaker-levelheavy duty, all steel handles are usedan led illuminates to indicate that limiting is taking placethis input is useful in applications, such as those employing powered mixers, in which it is more practical to bring a full-range, speaker-level signal to the subwoofer amplifierline-level stereo inputs are summed before being sent to the subwoofer's internal amplifierthe enclosure is covered in black carpeta top mounted, cast aluminum 35 mm pole mount receptacle can receive an optional ss3bk pole to facilitate use of the jrx118sp as a base for a mid-high speaker cabinet
-
3 f: mm lamp: 100 w, 12 v, efp reel capacity: 180 m film loading: automatic threading projection: forward, reverse projection speed: fps sound: magnetic playback on main sound track sound mode: mono amplifier output: ? frequency response: ? recording: magnetic recording on main sound track sound-on-sound: yes recording level control: auto and manual input terminal: microphone, phono input jacks: 5-pin din plug (european type) output terminal: line-out, external speaker output jack: line: 5-pin din plug (european type); ext sp:2-pin din built-in speaker: yes built-in film cutter: yes motor: magnetic motor power source: v ac, hz, 180 w weight: g dimensions: 190 x 210 x 360 mm made in germany by norisesta usado, lampara dañado lo vendo para coleccion,escucho ofertas razonables: acepto telefono android marketed in super 8 mm film lens: isco-göttingen vario-kiptagon f: 1
-
Lo vendo por irme del pais 100$ especificaciones tuning range: fm, mw power output: 65 watts per channel into 8¿ (stereo) surround output: 60w (front), 60w (center), 60w (rear), 60w (sub) frequency response: 10hz to 40khz total harmonic distortion: 005% damping factor: 30 input sensitivity: 3mv (mm), 200mv (line) signal to noise ratio: 80db (mm), 85db (line) channel separation: 55db (line) output: 200mv (line) speaker load impedance: 4¿ to 16¿ video connections: composite -dimensions: 430 x 158 x 358mm weight: 103kg aceptamos pagos: mercado pago (mp) banesco banco de venezuela mercantil provincial exterior tesoro bicentenario nota: los pagos realizados desde “otros bancos” serán confirmados antes de enviar la mercancíaa la venta amplificador o planta marca technics modelo sa-ex700, excelente amplificardor para casa en excelentes condiciones 100% operativo listo para destruir los vidrios de las casas, se puede conectar 4 cornetas mas un bajo y un center, ademas se puede conectar a te mezcladores, rockolas, entre otros
Baruta (Miranda)
-
Descripción: - output power: 750w rms per channel @ 4 ohms, 1khz, 01% (20hz - 20khz @ 8 ohms) - frequency response: (+/-01db, @rated output power, 8 ohms): 20hz - 20k hz - slew rate: 15v per usec - damping factor: @ 8 ohm: 300 - impedance: 20 k ohms balanced / 10 k ohms unbalanced - cooling system: 2 individual fans - special features: high/low pass filter / input sensitivity selector / ground lift; limiter - build in clip limiter - input: xlr 3pin + jack 6,3mm - output: speaker + binding post - dimensiones (lxwxh): 360 x 482 x 88mm 2-rack mount spaces - peso:: 42 lbs1% thd 500w rms per channel @ 8 ohms, 1khz, 01% thd - bridge mode, mono 1500w rms @ 8 ohms, 1k hz, 1% thd - total harmonic distortion: less than 0
San Cristóbal (Táchira)
-
Características frequency response 10hz - 20khz(-1db) dimensions (wxhxd) 210 x 43 x 122mm weight kg details input channels: 02 output channels: 06 routing: a, b, a+b output level: -24 ~ +6db maximum output level: 10procesador equalizador digital pro 2producto totalmente nuevo y con garantía! somos tienda física compra seguro! somos distribuidor exclusivo, te garantizamos servicio técnico y repuestos originales taramp's6s hecho en brasil 100% original6v rms) crossover hpf(variable): variable filter lpf(variable): variable filter phase: º limiter: adjustable equalizer: 3 band parametric audio generator: sinusoidal (variable) languages: portuguese / english / espanishtenemos disponible toda la linea de amplificadores y accesorios taramp's
-
Descripción: - output power: 750w rms per channel @ 4 ohms, 1khz, 01% thd - bridge mode, mono w rms @ 8 ohms, 1k hz, 1% thd - total harmonic distortion: less than hz - 20khz @ 8 ohms) - frequency response: (+/-01db, @rated output power, 8 ohms): 20hz - 20k hz - slew rate: 15v per usec - damping factor: @ 8 ohm: 300 - impedance: 20 k ohms balanced / 10 k ohms unbalanced - cooling system: 2 individual fans - special features: high/low pass filter / input sensitivity selector / ground lift; limiter - build in clip limiter - input: xlr 3pin + jack 6,3mm - output: speaker + binding post - dimensiones (lxwxh): 360 x 482 x 88mm 2-rack mount spaces - peso:: 42 lbs1% thd 500w rms per channel @ 8 ohms, 1khz, 0
-
Specifications tuning range: fm, mw "100 trumps" power output: 50 watts per channel into 8¿ (stereo) surround output: 50w (front), 50w (center), 15w (rear) frequency response: 10hz to 50khz total harmonic distortion: 008% input sensitivity: 25mv (mm), 150mv (line) signal to noise ratio: 74db (mm), 92db (line) output: 150mv (line) speaker load impedance: 6¿ to 16¿ video connections: composite dimensions: 434 x 142 x 315mm weight: 76kg sin remote control
-
output power: 675w rms per channel @ 4 ohms, 1khz, 01% thd - bridge mode, mono w rms @ 8 ohms, 1k hz, 1% thd - total harmonic distortion: less than hz - 20khz @ 8 ohms) - frequency response: (+/-01db, @rated output power, 8 ohms): 20hz - 20k hz - slew rate: 15v per usec - damping factor: @ 8 ohm: 300 - impedance: 20 k ohms balanced / 10 k ohms unbalanced - cooling system: 2 individual fans - special features: high/low pass filter / input sensitivity selector / ground lift; limiter - build in clip limiter - input: xlr 3pin + jack 6,3mm - output: speaker + binding post - dimensions (lxwxh): 360 x 482 x 88mm 2-rack mount spaces - weight: 42 lbs1% thd 450w rms per channel @ 8 ohms, 1khz, 0
-
frequency response 10hz ~ 50khz ±177v maximum input level 21dbv/9v damping factor (f=1khz 8o) >350 input impedance 20k o fuse 5mm x 20mm ac 115v/230v hz output stereo 8 o 2 x 400w rms output stereo 4 o 2 x 550w rms output bridged 8 o w rms dimensions (wxdxh) 19” x 138” x mm x 350mm x 88mm) net weight 261% input sensitivity 01 kg) impecable en perfecto estado se prueba al momento de la entrega5db signal to noise (lf / hf) >90db thd (lf / hf) > 0
-
Specifications tuning range: fm, mw 100 ó al cambio power output: 50 watts per channel into 8¿ (stereo) surround output: 50w (front), 50w (center), 15w (rear) frequency response: 10hz to 50khz total harmonic distortion: 0100 ó al cambio08% input sensitivity: 25mv (mm), 150mv (line) signal to noise ratio: 74db (mm), 92db (line) output: 150mv (line) speaker load impedance: 6¿ to 16¿ video connections: composite dimensions: 434 x 142 x 315mm weight: 76kg sin remote control
Anzoátegui (Cojedes)
-
Tuning range: fm, mw 100 power output: 50 watts per channel into 8¿ (stereo) surround output: 50w (front), 50w (center), 15w (rear) frequency response: 10hz to 50khz total harmonic distortion: 0100 ó al cambiospecifications "100 trumps ó al cambio"5mv (mm), 150mv (line) signal to noise ratio: 74db (mm), 92db (line) output: 150mv (line) speaker load impedance: 6¿ to 16¿ video connections: composite dimensions: 434 x 142 x 315mm weight: 708% input sensitivity: 26kg sin remote control
-
5v - 10v signal output pass-thru rca power input connector block terminal power wire gauge 4 awg speaker output connector block terminal speaker wire gauge 12 awg heat sink type extruded aluminum cooling convection remote control n/a visual indicators combination power / protect circuit topology class class a/b frequency response 15hz - 20khz signal-to-noise ratio >70 db a-weighted channel separation 50db shipping weight dimensions 2this is because they can be configured to operate in 4, 3, or 2 channel output modess watt 4-channel amplifier four channel amps are the preferred choice of many enthusiast because of their versatilitythe s is a terrific choice for any system builder! chrome plated cover blue led illumiated center logo adjustble 12db/octave crossover rca pass-thru outputs s specifications cea- compliant yes number of channels 4 rated power 50 watts x 4 @ 4-ohms 100 watts x 4 @ 2-ohms 200 watts x 2 @ 4-ohms (bridged) max power bridgeable yes crossover controls front & rear: high/flat/low 12db/octave x-over variable from 50hz - 250hz tone controls signal input front/rear low level (rca): 100mv - 5v front/rear high level (speaker line): 20awg leads @ 1