Input impedance connector

Listado input impedance connector

  • 7mhz / 50 ohms; de-emphasis: us; input voltage range: 10uv - 30mv rmsenlace estudio planta (radio studio transmitter and receiver link) caracteristicas del receptor: precio referencial en verde frequency ranges: 940 to 960 mhz 200 to 240 mhz - 300 to 330 mhz + other frequencies upon request; input impedance & connector: 50 ohm type 'n' female; audio frequency output: 0 dbm at 600 ohms +/- 6db adjcaractersticas del transmisor: frequency ranges: 940 to 960 mhz - 200 to 240 mhz - 300 to 330 mhz +other frequencies upon request; output impedance & connector: 50 ohm type 'n' female; harmonic frequencies level (refif output: 0dbm at 10

  • 2 a tx: max 20 a antenna impedance/connector: 50 ohms / so-239 dimensions (w*h*d): mm (") weight: 65 uv fm (12 db sinad) mhz: 025 uv selectivity: am: 6 khz (-6 db), 12 khz (-60 db) fm: 15 khz (-6 db), 32 khz (-60 db) ssb/cw: 28 vdc, 20 a (25% duty cycle) external speaker, 8 ohms 6 khz am filter 500 hz cw filter 270 hz cw filter 15 w at 10% distortion / 8 ohms external speaker connector: 38 khz ssb filteruse vfo a/b split instead power supply: vdc current drain/power consumption: rx: 14 khz (-6 db), 47 uv ssb/cw (10 db s/n) mhz: 1 uv mhz: 4 uv mhz: 03 lbs) other features: if shift, notch filter, vox receiver section receiver system: double conversion superheterodyne (am/ssb/cw) 1st if: mhz 2nd if: 85 mm, 4-16 ohms transmitter section rf output power: am: ~40 w (60 w input) fm: ~60 w (120 w input) ssb: ~120 w pep (250 w pep input) cw: ~100 w dc (200 w dc input) modulation system: am: low level modulation (if stage) fm: variable reactance direct shift ssb: balanced modulation max fm deviation: ±5 khz spurious emissions: less than -40 db microphone impedance/connector: 500 ohms to 5 kohm / 8-pin miscellaneous manufactured: japan, x (discontinued) additional info: related documents: user manual (36 mb) modifications: options/accessories: at-130 at-250 fm-430 hc-10 hs-5 hs-6 mb-430 mc-60a ps-430 sp-430 yk-88a yk-88c yk-88cn yk-88sn antenna tuner, m automatic antenna tuner, m fm unit digital world clock deluxe communications headphones lightweight communications headphones mobile mounting bracket desk microphone power supply, 1383 mhz triple conversion superheterodyne (fm) 1st if: mhz 2nd if: 8equipo 100% funcional en perfectas condiciones de uso sin detalles impecable se vende con fuente de poder y tunner de antena excelente precio acepto cambio solo por celulares cambio solo por celulares entiendalo cambio solo por celulares no por otras cosas caracteristicas: type: amateur hf transceiver frequency range: tx: m + warc rx: mhz tuning steps: hz 1 mhz mode: am/ssb/cw (fm option) channels/memory management: 8 regular (no 6 & 7 establishes upper and lower band search limits) lithium battery backup repeater shift/offset: no dedicated4 khz (-60 db) image rejection: 70 db af output power/speaker: 183 mhz 3rd if: 455 khz sensitivity: am (10 db s/n) mhz: 13 uv mhz: 40 uv mhz: 2

  • 5% miscellaneous timer sleep color black color category gray amplifier output power / total 200 watt input impedance 47 ohm input sensitivity 250 mv amplifier output details output power / channel 40 watt, 50 watt output impedance / channel 8 ohm frequency response hz total harmonic distortion (thd) 03 mm, rca x 2, rca x 3, rca x 6, toslink connector location front, rear dimensions & weight width 171 channel audio line-in, spdif input, monitor output, remote control, speakers output, subwoofer output, antenna, audio line-in, audio line-out, composite video/audio input, composite video/audio output, headphones qty connector type rca, banana/spade x 2, phone stereo 6home theater harman kardon avr100 obsequio 2 cornetas jbl 125 sat y cables rca -las 5 salidas funcionan perfecto1 in weight lbs mi nerúmo calelar o4z4-z6i-9s94  garantía: se prueba al momento de la entrega07 % power device power consumption operational 290 watt audio system type av receiver built-in decoders dolby 3 stereo, dolby digital, dolby pro logic surround system class 507 % channel type main, surround channel qty 2, 5 radio tuner type digital tuner bands am/fm tuning display fluorescent display preset station qty 30 remote control type universal remote control remote control technology infrared audio specifications type amplifier frequency response hz signal-to-noise ratio 73 db, 90 db connections type 51 channel digital sound processor (dsp) yes dsp presets hall, theater bass control yes treble contro yes built-in clock sleep timer tuner tuner type radio tuner - am/fm - digital signal-to-noise ratio 73 db total harmonic distortion mono: 0no funciona salida  de subwoofer y perilla de volumen  ver ultima foto 100%reparable opero el volumen con control remoto original nerúmo calelar o4z4-z6i-9s94     audio amplifier output details 50 watt - 8 ohm - hz - thd channels (main) 40 watt - 8 ohm - hz - thd channels (surround) response bandwidth hz signal-to-noise ratio 90 db total harmonic distortion 0

  • 5% miscellaneous timer sleep color black color category gray amplifier output power / total 200 watt input impedance 47 ohm input sensitivity 250 mv amplifier output details output power / channel 40 watt, 50 watt output impedance / channel 8 ohm frequency response hz total harmonic distortion (thd) 03 mm, rca x 2, rca x 3, rca x 6, toslink connector location front, rear dimensions & weight width 171 channel audio line-in, spdif input, monitor output, remote control, speakers output, subwoofer output, antenna, audio line-in, audio line-out, composite video/audio input, composite video/audio output, headphones qty connector type rca, banana/spade x 2, phone stereo 6home theater harman kardon avr100  -las 5 salidas funcionan perfecto1 in weight lbs mi nerúmo calelar o4z4-z6i-9s94  garantía: se prueba al momento de la entrega07 % power device power consumption operational 290 watt audio system type av receiver built-in decoders dolby 3 stereo, dolby digital, dolby pro logic surround system class 507 % channel type main, surround channel qty 2, 5 radio tuner type digital tuner bands am/fm tuning display fluorescent display preset station qty 30 remote control type universal remote control remote control technology infrared audio specifications type amplifier frequency response hz signal-to-noise ratio 73 db, 90 db connections type 51 channel digital sound processor (dsp) yes dsp presets hall, theater bass control yes treble contro yes built-in clock sleep timer tuner tuner type radio tuner - am/fm - digital signal-to-noise ratio 73 db total harmonic distortion mono: 0no funciona salida  de subwoofer y perilla de volumen  ver ultima foto 100%reparable opero el volumen con control remoto original nerúmo calelar o4z4-z6i-9s94     audio amplifier output details 50 watt - 8 ohm - hz - thd channels (main) 40 watt - 8 ohm - hz - thd channels (surround) response bandwidth hz signal-to-noise ratio 90 db total harmonic distortion 0

  • ) preset: i 0 banks x 3 = 30 total: 60 patches + sampling frequency: + a/d converter: 20-bit, 64-times oversampling 4 d/a converter: 20-bit, 128-times ovcrsampling + dsp: zoom original zfx-2 + input: + aux in: + output: + control connector: + display: + power requirements: + dimensions: + weight: khz guitar input (standard monaural phone jack (rated input level: -20dbm, input impedance: 470kq) mini phone jacklstereo (input impedance: iokr) combined linelheadphone output (standard monaural phone jack) (maxespecificaciones del fabricante: effect programs: effect types + amp simulator + znr) + effect modules: + sampler module: 5 modules + amp simulator + znr 32 or 16-second recording time selectable variable playback speed variable playback pitch sampler input source selectable aux in: (i) mixed/(2) lchi(3) rch (guitar in: (4) play note) + patch memory capacity: user: 10 banks u 3 = 30 (can be written and storedefectos programables + simulador de amplisolo cass ,dinero,money nada de cambios ni cambalaches   no insista precio publicado no efectue la compra si no está seguro haga preguntas inteligentes      nos reservamos   el derecho a contestarincluye fuente originalde tres bandas + znr (limpia el sonido), flanger, phaser, delay, chorus, chorus stereo, reverb, stereo delaypedal multiefecto zoom player toca como metallica,korn, ac/dc,iron maiden o elque teguste con este multiefecto lo haces,trae adactador de corrientecon  un solo detalle no se apaga,hay que desenchufurlo             33grabación, entrada de línea, entrada para pedal de expresiónevite ser calificado  negativo solo compradores serios al ofertar tiene 3 dias para concretar la compra si no lo hace sera calificado negativo no hago cambios     output level: +6dbm/output load impedance: lokq or more) for optional fpol or fp02 2-digit, 7-scgment led 9vdc, center minus 300ma (from supplied ac adapter) 276(w)x145(d)x30(h)rnm 55og 0 dbm = vrms design and specifications subject t o change without noticeefectos: compresor, wah, auto-wah, tremolo, distorsión (7 tipos), simulador de guitarra acústica, eq

  • 1khz program memories(user) + 200(preset) nominal input level input: -10dbu return: -10dbu input impedance input: 1m ohms return: 220k ohms nominal output level output: 0dbu send: -10dbu output impedance output: 2k ohms send: 2k ohms digital output eiaj cp, s/p dif dynamic range100db or greater (ihf-a) connectors input jack output jacks l (mono)/r phones jack send jack return jack digital out connector (coaxial) sub exp pedal/sub ctl pedal 1,2 jack midi connectors in/out ac adaptor jack power supplyac 14v: supply ac adaptor (boss brc series) current draw800ma accessoryac adaptor (brc series) size and weight width515 mm inchesdepth261 mm inchesheight75 mm 3 inchesweight4excelente precio por motivo de viajeespecificaciones: ad conversion24-bit + af method* da conversion24-bit sampling frequency44en excelentes condiciones multiefecto profesional para tocar en vivo y grabar

  • Specifications general type: amateur hf transceiver frequency range: m + warc mhz mhz mhz (rx only) mhz mhz (rx only) mhz mhz (rx only) mhz tuning steps: hz 1 khz mode: am/ssb/cw channels/memory management: 1 regular per band segment ram storage, relies on external power repeater shift/offset: no power supply: 138 khz (-60 db) cw-n: 600 hz (-6 db), 18 vdc ±15% current drain/power consumption: rx: ? ma tx: max 20 a antenna impedance/connector: 50 ohms / so-239 dimensions (w*h*d): mm (") weight: 66 uv (10 db s+n/n) ssb/cw: 04 kg ( lbs) other features: pbt, vox, nb, swr-meter receiver section receiver system: quadruple conversion superheterodyne 1st if: mhz 2nd if: mhz 3rd if: 455 khz 4th if: mhz sensitivity: am: 04 khz (-6 db), 43 mb) modifications5 khz (-60 db) (with optional crystal filter) image rejection: af output power/speaker: 2 w at ?% distortion / 8 ohms external speaker connector: transmitter section rf output power: am: 5-25 w ssb/cw: w modulation system: max fm deviation: no fm spurious emissions: less than -50 db microphone impedance/connector: 13 kohm / 8-pin (input level 120 mv typical) miscellaneous manufactured: japan, x (discontinued) additional info: related documents: user manual (33 uv (10 db s+n/n) selectivity: am: 6 khz (-6 db), 18 khz (-60 db) ssb/cw: 2

  • 9mohm/input range 150mv-20v p-p low input: impedance 10kohm/input range 300mv-40v p-p line input: impedance 22kohm/input level 0dbu nominal effects return: impedance 22kohm/level 0dbu nominal tuner output: impedance 22kohm/level 0dbu nominal effects send: impedance 22kohm/level 0dbu nominal di output: 600 ohm balanced/level -20dbu nominal speaker outputs: minimum impedance 4 ohms bass: ±15db @ 100hz lo: ±15db @ 220hz middle: ±15db @ 660hz hi mid: ±15db @ 1call or click to order now! specifications electric blue bass combo amp power output: 180 watts rms high input: impedance 3the preamp section boasts active/passive instrument inputs, a vu-style led input meter, 5-band eq with bright and deep switches, front panel-mounted di output, fx loop, and tuner/line outfeatures 180w rms 15" ashdown blueline driver fan-cooled, fast-transient power stage active/passive instrument inputs vu-style led input meter 5-band eq bright/deep switches fx loop front-panel direct output tuner/line out subharmonic generator extension cab output scuff-proof carpet covering reinforced corners pro tone that won't break the bankthe cabinet is finished in a tough, scuff-proof carpet covering with protective corners and a kick-proof metal grilleoverview the electric blue 180 offers fine ashdown tone for players on a budget5% thd frequency response: -3db at 33hz and 25khz power requirements: v "w x "h x "d 55 lbsthe electric blue 180 head produces 180 watts of ashdown goodness via a fan-cooled, fast-transient power stage6khz treble: ±15db @ 7khz shelving deep: +8db @ 50hz bright: +10db @ 10khz signal to noise: better than 80db (eq flat) distortion: less than 0a 15" high-performance ashdown blueline bass driver ensures exceptional attack, clarity, and low-end performance, while the extension speaker output can be used to connect an additional cabinet for use in larger venuesthe mighty ashdown subharmonic generator tracks the main signal and reproduces it an octave lower, and the level control lets you add just the right amount of low-end reinforcement--everything from a subtle thickening of the sound to unbridled, bone-crushing tone

  • 75" diaphragm compression driver frequency response (-6 db) 60 hz - 18 khz frequency range (-10 db) 56 hz - 20 khz nominal coverage (-6 db) 90° conical dmt maximum spl db peak amplifiers power output w continuous class d (500 w lf, 500 w hf) w peak input impedance xlr / ¼": 40 ko balanced / 20 ko unbalanced xlr / ¼" mic mode: o balanced rca: 10 ko controls power, gain a, gain b, mic/line, lf mode (ext sub/norm/deep™), hf mode (flat/vocal boost), front led (on/off/limit) indicators power, signal a, signal b, standby, limit, mic connectors balanced female xlr/¼" line/mic level input, balanced female xlr/¼" line level input, dual balanced male xlr full range line level out, balanced male xlr "mix" out, stereo rca line level input, remote gain control, locking iec power connector cooling on demand, 50 mm variable speed fan amplifier protection thermal limiting, output overcurrent, overtemperature muting, guardrail™ transducer protection thermal limiting, excursion limiting ac power input universal power supply vac, 50 to 60 hz ac power consumption (1/8 of full power) 100 vac, 2parrilla de acero 3asas de aluminio fundido 5módulo de alimentación eléctrica 6indicador led de encendido, en la parte delantera 4puntos de conexión del yugo m5 85 kg available accessories k10 tote, k10 yoke, m10 kit -k10 1specifications k10 configuration multipurpose 2-way transducers low-frequency high-frequency 10" cone transducer 113 a enclosure material impact resistant abs finish black paint grille rugged powder-coated steel dimensions (hwd) inches dimensions (hwd) mm 519 x 320 x 300 weight (net) 32 lb / 14casquillo para poste tilt-direct™ de ángulo doble 9patas antirresbalamientopuntos de instalación m10 7

  • 50 compact mixer frequency response mic input to any output (trim at 0 db): +0, -1 db, 10 hz to 150 khz, -3 db, 10 hz to 200 khz distortion thd and smpte imd; 20 hz to 20 khz mic input to main output: noise 20 hz to 20 khz bw (120-ohm source impedance) equivalent input noise (ein): -129 dbu residual output noise: channel and main mix levels off main, ctrl room, phones: -106 dbu common mode rejection ratio (cmrr) mic in: 60 db @ 1 khz gain @ maximum crosstalk adjacent inputs or input to output: -90 db @ 1 khz input gain control range: 0 db to +50 db equalization mono channel eq: high: ±15 db @ 12 khz; low: ±15 db @ 80 hz mixer rated output main, aux, control room: +4 dbu maximum rated output: +22 dbu maximum input levels mic input: +12 dbu, gain @ +10 db line input: +30 dbu, gain @ +10 db tape input and aux returns: +22 dbu input impedance mic input: 2consola tapco mix 50 como nueva muy poco uso features 1 mono mic/line input 2 stereo line inputs cd/tape input/output ultra-portable compact design fits almost anywhere rugged metal chassis takes all the punishment life can dish out intuitive layout gives access to all controls kensington security lock keeps mixer secure specifications mix6 kohms, balanced line input: 20 kohms, balanced stereo aux returns: 20 kohms, balanced cd/tape in: 24 kohms, balanced output impedance main: 240 ohms, balanced; 120 ohms, unbalanced ctrl room, aux sends: 120 ohms tape output: 1 kohm phones output: 25 ohms vu meters main left and right: 4 segments: clip (+ led = 0 dbu ac power requirements external power supply output: 182"w x 8"d (41x133x203mm) weight: 17 kg) no se atienden emergencias toda comunicacion es via ws o correo electronico condiciones de venta: - transferencia o deposito - entrega personal solo en maracaibo (previo acuerdo) - envios cargo y riesgo del comprador - ofertar solo si esta seguro de la compra en caso de no concretar en 3 dias se calificara negativo consultar disponibilidad antes de ofertar120 vac, 60 hz; europe: 240 vac, 50 hz; japan: 100 vac, hz; korea: 220 vac, 60 hz dimensions: 15 vac x ma (3-pin ac power connection) external power supply ac input: u

  • Power take-up: 7 ma frequency response: 20hz-100khz (in mode d): % at 1khz, 0 dbu impedance, input d: 1 mohm impedance, input s: 4 mohm impedance, output: 150 ohm signal-to-noise ratio: -103 db at (a-weighted) maxto exploit the dynamics of tube amplifiers to the full, the input voltage is also rectified from the power supply socket, then filtered, stabilized, and doubled to 18vit features jfet-based circuitry and provides 2 modes of operation, with selection via a mode selector switch with gold-plated contacts: "d" stands for driver; in this mode, the guitar signal is amplified, with absolutely no modification, at the input impedance of a guitar amp, efficiently eliminating losses on the route through leads and effects; the signal remains strong and clear, retaining its full dynamicsthe second setting "s" - as in sunday - multiplies input impedance by 4, bringing out previously inaudible details and, as gain increases, imparting to the guitar sound a characteristic and unmistakable warmth that has given this preamp its name - the result is a sound as mellow as a sunny sunday afternoon! even at a 15db gain setting, the lehle sunday driver always stays clean and absolutely free of background noise, thanks to its studio-standard signal-to-noise ratio of over -100db(356g) (without battery) length: cm) width: cm) overall height: cm)with its broad output range of 20 to hz, the lehle sunday driver, powered by a standard 9v (pp3) battery, can be used anywhere, as a cable driver for stadium and other large stages, in complex effects set ups, or as a recording preamp - and not just on sundays! a compact, portable preamp with 2 operating modesgain: 15 db weight: 0features compact high-end preamp jfet-based circuitry 2 modes of operation, d (driver) & s (sunday) clean and absolutely free of background noise gold-plated switches adjustable gain voltage internally doubled to 18v improve your sound wherever you play! specifications sunday driver guitar preamp voltage range: 9 - 20 v ac or dc, or 9v pp3 battery maxnuevos en su caja!!!  lehle sunday driver guitar preamp   preamp, buffer & drive  the lehle sunday driver is a high-end preamp with a convenient compact formatlevel: 5,7 v rms (approx

  • * boss es-5 looper control specifications modes memory mode/manual mode loops 5 patch memory 200 nominal input level input, return dbu maximum input level input, return dbu input impedance input: 1 m ohm (buffer: on) nominal output level send 1--5, output, tuner: -10 dbu maximum output level send 1--5, output, tuner: +13 dbu output impedance output, tuner: 1 k ohm (mixer: on) recommended load impedance 10 k ohms or greater controls number 1--5 switch, bank switch, mute switch edit button, write button, - button, + button, display/exit button, enter button, cursor left button, cursor right button display 16 characters, 2 lines (backlit lcd) indicator number 1--5 indicator, bank (memory/manual) indicator, mute indicator connectors input jack, send 1--5 jacks, return 1--5 jacks, output jack, tuner jack: 1/4-inch phone type ext ctl ctl 1/2, ctl 3/4 jacks, ctl in exp ctl 1/2 jack: 1/4-inch trs phone type midi connectors (in, out/thru) dc in jack power supply ac adaptor current draw 125 ma accessories ac adaptor rubber foot x 4 owner's manual leaflet "using the unit safely" options (sold separately) footswitch: fs-5u, fs-5l, fs-6, fs-7 expression pedal: fv-500l, fv-500h, roland ev-5

  • * boss es-5 looper control specifications modes memory mode/manual mode loops 5 patch memory 200 nominal input level input, return 1--5: -10 dbu maximum input level input, return 1--5: +13 dbu input impedance input: 1 m ohm (buffer: on) nominal output level send 1--5, output, tuner: -10 dbu maximum output level send 1--5, output, tuner: +13 dbu output impedance output, tuner: 1 k ohm (mixer: on) recommended load impedance 10 k ohms or greater controls number 1--5 switch, bank switch, mute switch edit button, write button, - button, + button, display/exit button, enter button, cursor left button, cursor right button display 16 characters, 2 lines (backlit lcd) indicator number 1--5 indicator, bank (memory/manual) indicator, mute indicator connectors input jack, send 1--5 jacks, return 1--5 jacks, output jack, tuner jack: 1/4-inch phone type ext ctl ctl 1/2, ctl 3/4 jacks, ctl in exp ctl 1/2 jack: 1/4-inch trs phone type midi connectors (in, out/thru) dc in jack power supply ac adaptor current draw 125 ma accessories ac adaptor rubber foot x 4 owner's manual leaflet "using the unit safely" options (sold separately) footswitch: fs-5u, fs-5l, fs-6, fs-7 expression pedal: fv-500l, fv-500h, roland ev-5

    Baruta (Miranda)

  • 2 kg) iec power connector 15a thd > 04vrms (for full rated power at 4 ohms) frequency response (at 1w, 20 hz - 20 khz) + 0 db, -1 db signal to noise ratio (a-weighted) >103 db (rated as dbr to full rated 8 ohm power output) intermodulation distortion (60 hz and 7 khz at 4:1, from full rated output to -30 db) damping factor (8 ohms, 10 hz to 400 hz) >200 crosstalk (below rated power) 20 hz to 1 khz >85 db, >55 db input impedance (nominal) 20k ohms balanced, 10k ohms unbalanced load impedance 2 to 8 ohms per channel in stereo, 4 to 8 ohms in bridge mono ac line voltage and frequency configurations available (+/- vac 60 hz, 100 vac hz, 220 and 240vac 50 hz dimensions 19" x 39 kg) shipping weight 135% somos tienda fisica en san crsitobalspecifications sensitivity 1

  • 1 kg) iec power connector 15a thd > 04vrms (for full rated power at 4 ohms) frequency response (at 1w, 20 hz - 20 khz) + 0 db, -1 db signal to noise ratio (a-weighted) >103 db (rated as dbr to full rated 8 ohm power output) intermodulation distortion (60 hz and 7 khz at 4:1, from full rated output to -30 db) damping factor (8 ohms, 10 hz to 400 hz) >200 crosstalk (below rated power) 20 hz to 1 khz >85 db, >55 db input impedance (nominal) 20k ohms balanced, 10k ohms unbalanced load impedance 2 to 8 ohms per channel in stereo, 4 to 8 ohms in bridge mono ac line voltage and frequency configurations available (+/- vac 60 hz, 100 vac hz, 220 and 240vac 50 hz dimensions 19" x 35% somos tienda fisica en san cristobal tariba haga sus preguntas antes de ofertar el precio es en disney9 kg) shipping weight 15

  • input section: maximum input level 06v rms input impedance 1m ohms direct output impedance 500 ohms aux-in input impedance 100k ohms equalizer: bass +/-10db @ 60hz lo-mid +6db/-10db @ 250hz hi-mid +6db/-10db @ 1khz treble +/-14db @ 7khz voicing filters: contour +2db @ 50hz/ -10db @ 500hz/ noise -90 db reference to 200w, "a" weightedamplificador gallien kruger mb 115 ultra ligero 1xw con estuche protector acepto verdes $ escucho ofertas! solo acepto dinero no cambios especificaciones: output power: 200w @ 4 ohmssi a los 5 dias de comprar no concreta la compra sera calificado negativodimensions (hxwxd): 23"x19"x14" peso / weight: 35lbsaceptos pagos por transferencia, depositos   banesco, tesoro, mercantil, venezuelaojo!!!! sino no sabe lo que esta comprando abstengase de hacerlo, pregunte todo lo que necesite saber sobre el producto que en la brevedad posible le respondere

  • Clever thinking by art! crystal-clear sound your input signal is reproduced with amazing clarity, allowing you to make remarkably high-quality recordings with a maximum output of 70 db! the art tube mp project series microphone preamplifier is the perfect partner for professional audio work! características del producto compact microphone preamplifier tube type: selected 12ax7a tube suitable for mics and other instruments frequency range: (-100 db): 20 hz to 20 khz) frequency response: 10 hz to 40 khz input impedance: 300 ohms (xlr female balanced), 1 meg ohms (jack) output impedance: 600 ohms (xlr male balanced) 300 ohms (jack) gain: maximum 70 db (xlr - xlr), +50 db (jack - xlr) gain pad: switchable, 20 db maximum input volume: +17 dbu (xlr), +16 dbu (jack) maximum output volume: +20 dbu (xlr), +26 dbu (jack) xlr input impedance: switchable, 4professional microphone / instrument tube preamplifieroutgoing volume is indicated with bright ledsrubber strips on the underside ensure extra grip on your desk top or flight casewhat's more, there are special grooves on the housing as well as the strips which makes it possible to stack units on top of each other14 kg entrega jnmediataart has integrated user-friendly buttons and switches which are easy to operatetheir tube mp project series microphone preamplifier is also high-quality that allows you to connect guitars, keyboards and electronic drum kits to your mixerfotos reales zelle ref 907 ohms (xlr), 840 kohms (jack) low cut filter: switchable, -3 db at 40 hz output phase: switchable output limiter type: switchable phantom power: 48v switchable signal indicator: led robust aluminium housing dimensions: 150 x 165 x 44art project series general art products deliver professional audio qualityviene en su caja incluye adaptador de corrientesleek and sturdy design the technical components of this device are contained in a rugged aluminium housing

  • ·         una forma única para que los guitarristas agreguen expresión a su desempeño construcción de metal boss resistente a la carretera   nominal input level: -20 dbu input impedance: 1 m ohm nominal output level: -20 dbu output impedance: 1 k ohm recommended load impedance: 10 k ohms or greater controls: pedal switch, level knob, tone knob, drive knob indicator: check indicator (serves also as battery check indicator) connectors: input jack, output jack, ac adaptor jack (dc 9 v) power supply: dc 9 v, dry battery 6f22 (9 v) type (carbon), dry battery 6lr61 (9 v) type (alkaline), ac adaptor (psa series: optional) current draw: 36 ma (dc 9 v) expected battery life under continuous use: carbon: 3 hours, alkaline: 10 hours * these figures will vary depending on the actual conditions of useboss dyna drive dn-2   un pedal de overdrive que reacciona ante ti el dn-2 es un nuevo y excitante pedal de overdrive que reacciona a la intensidad de tu rendimiento  detalles: el pedal tienes pequeñas marcas de uso, funciona y suena perfectamente, no esta en su caja original·         la aclamada tecnología dyna amp derivada de roland's cube-60========================================= entregas directas: previo acuerdo con el comprador envios: domesa, zoom y tealca no se realizan envíos los días viernes no soy responsable por daños o pérdida de la mercancía en el envío ========================================= medios de pago: mercado pago transferencias a banesco, provincial y mercantil, efectivo========================================= otras condiciones de venta: • cuenta con 2 días para concretar la compra • los envíos son con cobro a destino • el comprador selecciona la empresa de envíos y asume los riesgos del transporte de los productos • no se hacen envíos los días viernes ya que esto aumenta la probabilidad de extravío del producto  ·         proporciona una transición dinámica entre saturación limpia a pesada en función de la fuerza de selección y / o el volumen de la guitarraeste exclusivo pedal boss viene equipado con la aclamada tecnología dyna amp introducida recientemente en el popular amplificador cube-60 de roland, que le permite crear transiciones de tono únicas basadas en la dinámica de pickinges posible obtener un sonido de salida limpio y transparente tocando suavemente, o un potente sonido de overdrive potente al seleccionar de forma agresiva  precio 40 vrds realice todas las preguntas necesarias para aclarar sus dudas de las condiciones del artículo

  • Por favor aclare todas sus dudas antes de ofertar18 uv (all e-types) mhz: 0gracias por su compra !!!!55 uv (all e-types) mhz: 22 khz (-6 db), 440 uv (k-type) mhz: 0ojo no incluye el micrófono de mesa ***** calidad cmj import ***** nuevo o casi nuevo!!! vendo mi radio hf kenwood ts en impecables condiciones sin rayas ni ningún detalle de funcionamiento8 vdc a15% current drain/power consumption: rx: squelched 2auto-at on hf/6 m16 uv (k-type) mhz: 0radio transmisor hf kenwood ts (usado en caja impecable) (el micrófono de mesa se vende por separado)5 mm, 8 ohms transmitter section rf output power: hf w (am: 5-25 w) 6 m w (am: 5-25 w) 2 m w (am: 5-25 w) 70 cm 5-50 w (am: w) modulation system: am: low level fm: reactance ssb: balanced max fm deviation: fm: a5 khz nfm: a2can also be operated via computer or optional rc- control head market codes: k = americas, e = europe, e2 = spain receiver section receiver system: quadruple conversion superheterodyne (main transceiver, except fm) 1st if: or mhz (hf/6 m), mhz ( mhz), mhz ( mhz) 2nd if: mhz 3rd if: 455 khz 4th if: 12 khz (except fm) dual conversion superheterodyne (sub-receiver) 1st if: mhz 2nd if: 455 khz sensitivity: main - am (10 db s/n) mhz: 312 lbs) other features: ctcss/pl, dcs28 uv selectivity: main - am (lo-cut: 100 hz/hi-cut: hz) 6 khz (-6 db), 12 khz (-50 db) main - fm 12 khz (-6 db), 25 khz (-50 db) main - ssb (lo-cut: 300 hz/hi-cut: hz) 2el radio solo se probo pocas veces y se guardo en su caja, con todos sus accesorios y manuales tal cual se que en las imágeneslas pruebas se puede hacer en rcv previo permiso de su presidente***** el pago de material de embalaje es obligatorio ***** (envíos por encomiendas)6 uv mhz: 2 uv mhz: 13 uv mhz: 1 uv (all e-types) mhz: 1specifications general type: amateur hf/vhf/uhf transceiver frequency range: tx: m + warc / 6 m / 2 m / 70 cm rx: mhz ( mhz/10 w option (ut-20)) tuning steps: from 1 mhz down to 1 hz mode: am/fm/nfm/ssb/cw/fsk channels/memory management: 300 regular repeater shift/offset: a mhz in 50 khz steps power supply: 1311 uv (all e-types) mhz: 04 khz (-60 db) sub - am 12 khz (-6 db), 25 khz (-50 db) sub - fm 12 khz (-6 db), 25 khz (-50 db) image rejection: main: 70 db sub: 60 db af output power/speaker: 128 uv (all e-types) mhz: 0preguntas fueran de contexto serán dadas de baja y los seudónimos bloqueados55 uv sub - fm (12 db sinad) mhz: 018 uv main - ssb/cw/fsk (10 db s/n) mhz: 4 uv mhz: 05 khz spurious emissions: hf: less than -50 db 6 m to 70 cm: less than -60 db microphone impedance/connector: 600 ohms / 8-pin el radio se prueba al momento de la compra25 uv (k-type) mhz: 0built-in 1k2/9k6 tnc11 uv sub - am (10 db s/n) mhz: 125 uv (k-type) mhz: 15 a antenna impedance/connector: 50 ohms / 3*so-*n-type (+1*n-type for 23 cm/ut-20 option) ( ohms on hf/6 m with built-in autotuner) dimensions (w*h*d): mm (") weight: 7dx-cluster functions5 w at 10% distortion / 8 ohms external speaker connector: 2*3aceptamos mercado pago y transferencias a nuestra cuenta jurídica banesco4 uv (k-type) mhz: 1 uv mhz: 1 uv main - fm (12 db sinad) mhz: 0

  • Incluye cable de corriente y caja original acepto cambio por telefono o amplificador especificaciones del producto nominal input level -20 dbu input impedance 1 m ohms nominal output level -20 dbu output impedance 1 k ohms equivalent input noise level -110 dbu (ihf-a weighted, typ) connectors input jack, output jack, ac adaptor jack (dc 9 v) power supply dc 9 v: dry battery 9 v type (6f22/9 v), ac adaptor current draw 11 ma (dc 9 v) accessories dry battery 9 v type (6f22/9 v)c

  • 3 v rms) for rated output, 15 kohm unbalanced at rca input +4 dbu (123 v rms) for rated output, 40 kohm balanced at xlr input hum and noise: 85 db below rated output minimum load impedance: 8 ohms per channel, stereo mode 8 ohms, btl mode protection circuits: dc balance voltage protector electronic output power manual http://pdfsonido puro y limpio, especial para los que saben de audio especificaciones: output power at 8 ohms, (1 khz) 25 watts minimum rms per channel in stereo mode, both channels driven 50 watts minimum rms in btl (monophonic mode) total harmonic distortion watts, 8 ohms, stereo mode) watts, 8 ohms, btl mode) intermodulation distortion: less than hz: 7 khz (4:1) frequency response 20 hz to 20 khz, +0/-1 db at rated power output damping factor: 80 minimum, 8 ohm load, 20 hz to 20 khz input impedance and sensitivity: -10 dbv (0com/manuals/electronics/av/brochures/pa-20mkii_faxback

  • Power capability: frequency coverage: input impedance: load impedance: balanced feedlines: long-wire antennas: 1the rear panel has four type so-239 connectors (one for input and 3 for outputs), three screw terminal connections (for long-wire and open-wire feeder systems), and a ground postcm) profundidad: 13 in• aceptamos mercado pago y transferencias5 db o menos en cada banda después de sintonizarvatios promedio servicio continuo, vatios pep lee vswr o reenvía potencia, vatios o vatios50 ohms (resistive)5 db or less on each band after tuningpanel trasero impedancias del punto de alimentación hacia arriba conectores: a 5: l vswr referenciado a 50 ohmios además, 5: l referenciado a 200 ohmios con el accesorio drake b- balun (3: l en 10 metros)cm) depth: 13 in75 ohm coaxial at front panel controls: a lower vswr can be used• hacemos envíos por mrw y domesa con cobro en destino• no aceptamos devolucionesband switch marked for 160, meter: , and 10 meter amateur bands; however, frequency wattmeter accuracy: coverage between amateur bands is possible insertion loss: by using the nearest band positions with a small dimensions: reduction in matching capabilitybanda interruptor marcado para 160, metro: y 10 bandas de aficionados de metro; sin embargo, la precisión del vatímetro de frecuencia: la cobertura entre bandas amateur es posiblecapacidad de potencia: cobertura de frecuencia: impedancia de entrada: impedancia de carga: líneas de alimentación balanceadas: antenas de cable largo: 1con el drake b- accesorio balun, tonos impedancias del punto de alimentación de 40 a ohmios, o 5: l vswr referenciado a 200 ohmios (3: l en 10 metros)with the drake b- accessory balun, tunes feed point impedances of 40 to ohms, or 5:l vswr referenced to 200 ohms (3:l on 10 meters)• no somos tienda física50 ohmios (resistivo)50 ohm coaxial con vswr de 5: l o menos en cualquier ángulo de fase (3: 1 en 10 metros)(33 cm) incluyendo conectores• pasados 5 días, toda compra no concretada será calificada negativawatts average continuous duty, watts pep reads vswr or forward power, watts or wattsf 5% de lectura + 1% de escala completa50 ohm coaxial with vswr of 5:l or less at any phase angle (3:l on 10 meters)especificaciones5 cm) ancho: in• somos personas serias y responsablesalso, 5:l referenced to 200 ohms with the drake b- accessory balun (3:l on 10 meters)(5 kg) provide for the adjusb ment of resistive and reactive tuning, antenna switching, band switching, vswr calibration, and selection of watts or vswr functions of the meterse entrega por email manual del equipo en pdf 1-2f 5% of reading + 1% of full scale(33 cm) including connectors5 cm) width: in• si no está seguro, pregunte(5 kg) proveer para el adjusb de resistencia y sintonización reactiva, antena conmutación, conmutación de banda, calibración vswr, y selección de vatios o funciones vswr del medidor el panel trasero tiene cuatro tipo conectores so-239 (uno para entrada y 3 para salidas), tres terminales de tornillo conexiones (para alambre largo y alambre abierto sistemas de alimentación), y poste de tierra 1-2• antes de comprar, haga todas las preguntas necesariascoaxial de 75 ohmios en los controles del panel frontal: un vswr menor puede ser usadopérdida de inserción: utilizando las posiciones más cercanas de la banda con una pequeña dimensiones: reducción en la coincidencia capacidadrear panel feed point impedances up connectors: to 5:l vswr referenced to 50 ohms

  • Power capability: frequency coverage: input impedance: load impedance: balanced feedlines: long-wire antennas: 1the rear panel has four type so-239 connectors (one for input and 3 for outputs), three screw terminal connections (for long-wire and open-wire feeder systems), and a ground postcm) profundidad: 13 in• aceptamos mercado pago y transferencias5 db o menos en cada banda después de sintonizarvatios promedio servicio continuo, vatios pep lee vswr o reenvía potencia, vatios o vatios5 db or less on each band after tuningcm) depth: 13 inpanel trasero impedancias del punto de alimentación hacia arriba conectores: a 5: l vswr referenciado a 50 ohmios además, 5: l referenciado a 200 ohmios con el accesorio drake b- balun (3: l en 10 metros)75 ohm coaxial at front panel controls: a lower vswr can be used• hacemos envíos por mrw y domesa con cobro en destino• no aceptamos devolucionesbanda interruptor marcado para 160, metro: y 10 bandas de aficionados de metro; sin embargo, la precisión del vatímetro de frecuencia: la cobertura entre bandas amateur es posiblecapacidad de potencia: cobertura de frecuencia: impedancia de entrada: impedancia de carga: líneas de alimentación balanceadas: antenas de cable largo: 1con el drake b- accesorio balun, tonos impedancias del punto de alimentación de 40 a ohmios, o 5: l vswr referenciado a 200 ohmios (3: l en 10 metros)with the drake b- accessory balun, tunes feed point impedances of 40 to ohms, or 5:l vswr referenced to 200 ohms (3:l on 10 meters)• no somos tienda física50 ohmios (resistivo)50 ohm coaxial con vswr de 5: l o menos en cualquier ángulo de fase (3: 1 en 10 metros)(33 cm) incluyendo conectores• pasados 5 días, toda compra no concretada será calificada negativawatts average continuous duty, watts pep reads vswr or forward power, watts or wattsf 5% de lectura + 1% de escala completa50 ohm coaxial with vswr of 5:l or less at any phase angle (3:l on 10 meters)especificaciones5 cm) ancho: intuner de antena para radios hf drake mn poco uso con manual en archivo pdf • antes de comprar, haga todas las preguntas necesarias• somos personas serias y responsablesalso, 5:l referenced to 200 ohms with the drake b- accessory balun (3:l on 10 meters)(5 kg) provide for the adjusb ment of resistive and reactive tuning, antenna switching, band switching, vswr calibration, and selection of watts or vswr functions of the meterf 5% of reading + 1% of full scale(33 cm) including connectors5 cm) width: in• si no está seguro, pregunteband switch marked for 160, meter: , and 10 meter amateur bands; however, frequency wattmeter accuracy: coverage betweenamateur bands is possible insertion loss: by using the nearest band positions with a small dimensions: reduction in matching capability(5 kg) proveer para el adjusb de resistencia y sintonización reactiva, antena conmutación, conmutación de banda, calibración vswr, y selección de vatios o funciones vswr del medidor el panel trasero tiene cuatro tipo conectores so-239 (uno para entrada y 3 para salidas), tres terminales de tornillo conexiones (para alambre largo y alambre abierto sistemas de alimentación), y poste de tierra 1-250 ohms (resistive)coaxial de 75 ohmios en los controles del panel frontal: un vswr menor puede ser usadopérdida de inserción: utilizando las posiciones más cercanas de la banda con una pequeña dimensiones: reducción en la coincidencia capacidadrear panel feed point impedances up connectors: to 5:l vswr referenced to 50 ohms

  • Acepto cambio por samsung j6 en excelentes condiciones!!! power requirements 38w 220 vac input impedance >1m¿ nominal input level 100 mv power output 30w rrated load impedance 8¿ speaker complement one 8¿ special design 10" speaker (p/n ) dimensions height: 156 cm) weight 25 lbs4 cm) width: 17 in

  • Acepto cambio por samsung j6 en excelentes condiciones!!! power requirements 38w 220 vac input impedance >1m¿ nominal input level 100 mv power output 30w rrated load impedance 8¿ speaker complement one 8¿ special design 10" speaker (p/n 036502) dimensions height: 156 cm) weight 25 lbs4 cm) width: 17 in

    Libertador-Aragua (Aragua)

  • Excelentes condiciones!!! power requirements 38w 220 vac input impedance >1m¿ nominal input level 100 mv power output 30w rrated load impedance 8¿ speaker complement one 8¿ special design 10" speaker (p/n 036502) dimensions height: 156 cm) weight 25 lbs4 cm) width: 17 in

    Libertador-Aragua (Aragua)

  • " technical info: specifications (): input impedance = 500 k ohms, output impedance = 1 k ohms; bandwidth = 40 hz-16 khz; gain = 0 db; plus the delay time range and sweep speed listed above notable ic chips: mn bbd chip driven by a mn clock generator/driver cmos chip; one tl022cp and two -type op amps (early versions) or one 358-type and two - type op amps (later versions)8-8 hz), width, regen from the manual (, shared with the fx75-b): "the fx75b and fx72 delay the input sound and then mix the delayed and original sounds togetherthe regeneration control allows the adjustment of the effect from very subtle to very pronouncedthe delay time control adjusts the amount of delay time in conjunction with: the width control which sets the range through which the delay time may vary, and the speed control which adjusts the rate at which delay time changesoferta en efectivo: 20 verdes pedal de guitarra dod bass stereo flanger fx72made in usa controls: delay (1-12 milliseconds), speed (0the regeneration control adjusts the height of the comb filter peaks by controlling feedback through the delay circuitry

  • Excelentes condiciones!!! power requirements 38w 220 vac input impedance >1m¿ nominal input level 100 mv power output 30w rrated load impedance 8¿ speaker complement one 8¿ special design 10" speaker (p/n ) dimensions height: 154 cm) width: 17 in4 kg) 180 aguacates6 cm) weight 25 lbs

  • 3khz dynamic range (maximum signal-to-noise ratio): >80db (typical, a-weighted) input connectors: left and right line input connectors (rca) polarity: positive signal at "+" input produces outward low-frequency cone displacement dynamic power: 10 watts into 4 ohms (per channel) at 05% distortion input impedance: 10k ohms (unbalanced) input sensitivity: 100mv pink noise input produces 90dba output spl at 1 meter with volume control at maximum protection: rf interference, output current limiting, over temperature, turn on/off transient, subsonic filter indicator: blue power led ring around on/off/volume knob on front panel power requirements: v~hz, v~hz; powered via detachable 2-conductor line cord cabinet: vinyl-laminated mdf dimensions: 725-inch diameter, magnetically shielded with curved cone with high-temperature voice coil hf driver: 1-inch diameter, magnetically shielded silk dome frequency response: 100hz - 20khz (+/-3 db) crossover frequency: 2100 verdes, usados en perfecto estado specs type: two-way desktop reference monitor lf driver: 3without packing) specifications subject to change without notice

  • Frequency response: 56hz-22khz crossover frequency: 3 khz low-frequency amplifier power: 40 watts high-frequency amplifier power: 30 watts maximum signal-to-noise (dynamic range): > 100 db (typical a-weighted) polarity: positive signal at + input produce outward lf cone displacement input impedance: 20 k ohms balanced, 10 k ohms unbalanced input sensitivity: 85 mv pink noise input produces 90 dba output spl at one meter with volume control at maximum power: factory programmed for either 115v ~ hz or 230v ~ hz protection: rf interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse cabinet: vinyl-laminated mdf size: 72cm weight: 11 lbssomos tienda fisica estamos a su orden tenemos punto de venta7” x 7” x cm x 17

¿No has encontrado lo que buscas? Prueba otra búsqueda

Busquedas relacionadas input impedance connector