Load impedance

Listado load impedance

  • 4 dbv, 535 mv rms effects return: load impedance: high z, 22 k ω designed input level: -5gran oportunidad por viaje! amplificador para guitarra peavey bandit 112 80w poco uso en perfecto estado! cero detalles!! power amplifier section: rated power and load: power specs measured with power level @ 100 80 w rms into 8 ω 100 w rms into 4 ω power @ clipping (typically): 1 khz, 120 vac line 80 w rms into 8 ω 100 w rms into 4 ω frequency response: 0, -3 db 100 hz to 20 khz @ 65 w rms into 8 ω hum and noise: greater than 90 db below rated power power consumption: domestic 300 w @ 60 hz, 120 vac export 300 w @ 50/60 hz, 220-230 vac effects send: load impedance: 1 k ω or greater nominal output level: -5classic/modern/high gain switch (lead): three different eq and gain voicings external footswitch functions: clean or lead channel selection and volume boost dimensions (h x w x d): 2058 cm weight: 404 dbv, 535 mv rms boost level @ 10: 10 db boost speaker simulated direct output level @ 10: 700 mv, -3 dbv system hum & noise @ nominal input level: 20 hz to 20 khz unweighted greater than 80 db below rated power equalization: special low, mid, and high passive type eq55 kg no se lo pierda invierta ya!!vintage/classic/warm switch (clean): three distinct eq voicings

    Guatire (Miranda)

  • 4 dbv, 535 mv rms effects return: load impedance: high z, 22 k ω designed input level: -5gran oportunidad por viaje! amplificador para guitarra peavey bandit 112 80w poco uso en perfecto estado! cero detalles!! power amplifier section: rated power and load: power specs measured with power level @ 100% 80 w rms into 8 ω 100 w rms into 4 ω power @ clipping (typically): 1 khz, 120 vac line) 80 w rms into 8 ω 100 w rms into 4 ω frequency response: 0, -3 db 100 hz to 20 khz @ 65 w rms into 8 ω hum and noise: greater than 90 db below rated power power consumption: domestic) 300 w @ 60 hz, 120 vac export) 300 w @ 50/60 hz, 220-230 vac effects send: load impedance: 1 k ω or greater nominal output level: -5classic/modern/high gain switch (lead): three different eq and gain voicings external footswitch functions: clean or lead channel selection and volume boost dimensions (h x w x d): 2055 kg) no se lo pierda invierta ya!!4 dbv, 535 mv rms boost level @ 10: 10 db boost speaker simulated direct output level @ 10: 700 mv, -3 dbv system hum & noise @ nominal input level: 20 hz to 20 khz unweighted) greater than 80 db below rated power equalization: special low, mid, and high passive type eq58 cm weight: 40vintage/classic/warm switch (clean): three distinct eq voicings

    Guatire (Miranda)

    $ 4

  • 23 v rms) for rated output, 40 kohm balanced at xlr input hum and noise: 85 db below rated output minimum load impedance: 8 ohms per channel, stereo mode 8 ohms, btl mode protection circuits: dc balance voltage protector electronic output power manual http://pdfsonido puro y limpio, especial para los que saben de audio especificaciones: output power at 8 ohms, (1 khz) 25 watts minimum rms per channel in stereo mode, both channels driven 50 watts minimum rms in btl (monophonic mode) total harmonic distortion watts, 8 ohms, stereo mode) watts, 8 ohms, btl mode) intermodulation distortion: less than hz: 7 khz (4:1) frequency response 20 hz to 20 khz, +0/-1 db at rated power output damping factor: 80 minimum, 8 ohm load, 20 hz to 20 khz input impedance and sensitivity: -10 dbv (03 v rms) for rated output, 15 kohm unbalanced at rca input +4 dbu (1com/manuals/electronics/av/brochures/pa-20mkii_faxback

  • Output level: +6dbm/output load impedance: lokq or more) for optional fpol or fp02 2-digit, 7-scgment led 9vdc, center minus 300ma (from supplied ac adapter) 276(w)x145(d)x30(h)rnm 55og 0 dbm = vrms design and specifications subject t o change without noticede tres bandas + znr (limpia el sonido), flanger, phaser, delay, chorus, chorus stereo, reverb, stereo delaysolo cass ,dinero,money nada de cambios ni cambalaches   no insista precio publicado no efectue la compra si no está seguro haga preguntas inteligentes      nos reservamos   el derecho a contestar) preset: i 0 banks x 3 = 30 total: 60 patches + sampling frequency: + a/d converter: 20-bit, 64-times oversampling 4 d/a converter: 20-bit, 128-times ovcrsampling + dsp: zoom original zfx-2 + input: + aux in: + output: + control connector: + display: + power requirements: + dimensions: + weight: khz guitar input (standard monaural phone jack (rated input level: -20dbm, input impedance: 470kq) mini phone jacklstereo (input impedance: iokr) combined linelheadphone output (standard monaural phone jack) (maxincluye fuente originalpedal multiefecto zoom player toca como metallica,korn, ac/dc,iron maiden o elque teguste con este multiefecto lo haces,trae adactador de corrientecon  un solo detalle no se apaga,hay que desenchufurlo             33especificaciones del fabricante: effect programs: effect types + amp simulator + znr) + effect modules: + sampler module: 5 modules + amp simulator + znr 32 or 16-second recording time selectable variable playback speed variable playback pitch sampler input source selectable aux in: (i) mixed/(2) lchi(3) rch (guitar in: (4) play note) + patch memory capacity: user: 10 banks u 3 = 30 (can be written and storedevite ser calificado  negativo solo compradores serios al ofertar tiene 3 dias para concretar la compra si no lo hace sera calificado negativo no hago cambios     efectos: compresor, wah, auto-wah, tremolo, distorsión (7 tipos), simulador de guitarra acústica, eqefectos programables + simulador de ampligrabación, entrada de línea, entrada para pedal de expresión

  • * boss es-5 looper control specifications modes memory mode/manual mode loops 5 patch memory 200 nominal input level input, return dbu maximum input level input, return dbu input impedance input: 1 m ohm (buffer: on) nominal output level send 1--5, output, tuner: -10 dbu maximum output level send 1--5, output, tuner: +13 dbu output impedance output, tuner: 1 k ohm (mixer: on) recommended load impedance 10 k ohms or greater controls number 1--5 switch, bank switch, mute switch edit button, write button, - button, + button, display/exit button, enter button, cursor left button, cursor right button display 16 characters, 2 lines (backlit lcd) indicator number 1--5 indicator, bank (memory/manual) indicator, mute indicator connectors input jack, send 1--5 jacks, return 1--5 jacks, output jack, tuner jack: 1/4-inch phone type ext ctl ctl 1/2, ctl 3/4 jacks, ctl in exp ctl 1/2 jack: 1/4-inch trs phone type midi connectors (in, out/thru) dc in jack power supply ac adaptor current draw 125 ma accessories ac adaptor rubber foot x 4 owner's manual leaflet "using the unit safely" options (sold separately) footswitch: fs-5u, fs-5l, fs-6, fs-7 expression pedal: fv-500l, fv-500h, roland ev-5

  • * boss es-5 looper control specifications modes memory mode/manual mode loops 5 patch memory 200 nominal input level input, return 1--5: -10 dbu maximum input level input, return 1--5: +13 dbu input impedance input: 1 m ohm (buffer: on) nominal output level send 1--5, output, tuner: -10 dbu maximum output level send 1--5, output, tuner: +13 dbu output impedance output, tuner: 1 k ohm (mixer: on) recommended load impedance 10 k ohms or greater controls number 1--5 switch, bank switch, mute switch edit button, write button, - button, + button, display/exit button, enter button, cursor left button, cursor right button display 16 characters, 2 lines (backlit lcd) indicator number 1--5 indicator, bank (memory/manual) indicator, mute indicator connectors input jack, send 1--5 jacks, return 1--5 jacks, output jack, tuner jack: 1/4-inch phone type ext ctl ctl 1/2, ctl 3/4 jacks, ctl in exp ctl 1/2 jack: 1/4-inch trs phone type midi connectors (in, out/thru) dc in jack power supply ac adaptor current draw 125 ma accessories ac adaptor rubber foot x 4 owner's manual leaflet "using the unit safely" options (sold separately) footswitch: fs-5u, fs-5l, fs-6, fs-7 expression pedal: fv-500l, fv-500h, roland ev-5

    Baruta (Miranda)

  • ·         una forma única para que los guitarristas agreguen expresión a su desempeño construcción de metal boss resistente a la carretera   nominal input level: -20 dbu input impedance: 1 m ohm nominal output level: -20 dbu output impedance: 1 k ohm recommended load impedance: 10 k ohms or greater controls: pedal switch, level knob, tone knob, drive knob indicator: check indicator (serves also as battery check indicator) connectors: input jack, output jack, ac adaptor jack (dc 9 v) power supply: dc 9 v, dry battery 6f22 (9 v) type (carbon), dry battery 6lr61 (9 v) type (alkaline), ac adaptor (psa series: optional) current draw: 36 ma (dc 9 v) expected battery life under continuous use: carbon: 3 hours, alkaline: 10 hours * these figures will vary depending on the actual conditions of use========================================= entregas directas: previo acuerdo con el comprador envios: domesa, zoom y tealca no se realizan envíos los días viernes no soy responsable por daños o pérdida de la mercancía en el envío ========================================= medios de pago: mercado pago transferencias a banesco, provincial y mercantil, efectivo========================================= otras condiciones de venta: • cuenta con 2 días para concretar la compra • los envíos son con cobro a destino • el comprador selecciona la empresa de envíos y asume los riesgos del transporte de los productos • no se hacen envíos los días viernes ya que esto aumenta la probabilidad de extravío del producto  ·         proporciona una transición dinámica entre saturación limpia a pesada en función de la fuerza de selección y / o el volumen de la guitarra  precio 40 vrds realice todas las preguntas necesarias para aclarar sus dudas de las condiciones del artículoeste exclusivo pedal boss viene equipado con la aclamada tecnología dyna amp introducida recientemente en el popular amplificador cube-60 de roland, que le permite crear transiciones de tono únicas basadas en la dinámica de pickingboss dyna drive dn-2   un pedal de overdrive que reacciona ante ti el dn-2 es un nuevo y excitante pedal de overdrive que reacciona a la intensidad de tu rendimiento  detalles: el pedal tienes pequeñas marcas de uso, funciona y suena perfectamente, no esta en su caja originales posible obtener un sonido de salida limpio y transparente tocando suavemente, o un potente sonido de overdrive potente al seleccionar de forma agresiva·         la aclamada tecnología dyna amp derivada de roland's cube-60

  • 25 frequency response (at 1 watt, 40 hz - 20 khz) +0 db, –3 db signal to noise ratio below rated power (20 hz to 20 khz, inputs terminated) a-weighted, below rated power > 100 db total harmonic distortion (thd) at 1 full bandwidth power, from 20 hz to 20 khz intermodulation distortion (imd) 60 hz and 7 khz at 4:1, from full rated output to –30 db damping factor (8 ohm): 10 hz to 400 hz > 300 crosstalk (below rated power) at 1 khz at 20 khz –76 db –58 db input impedance (nominal) (balanced, unbalanced) 20 kilohms, 10 kilohms load impedance stereo bridge mono 4 ohms 8 ohms ac line voltage and frequency configurations available (± vac 60 hz 100 vac hz 220 vac 50 hz vac 50 hz ventilation flow-through ventilation from front to back cooling internal heat sinks with forced-air cooling air volume requirements (per minute per unit) ft m3) dimensions: width, height, depth lps ,: eia standard 19"w (eia rs-310-b) x cm) h xcm) dspecifications sensitivity (volts rms) for full rated power at 4 ohms 1net weight, shipping weight lps lb (10

  • Power capability: frequency coverage: input impedance: load impedance: balanced feedlines: long-wire antennas: 1f 5% de lectura + 1% de escala completa50 ohm coaxial with vswr of 5:l or less at any phase angle (3:l on 10 meters)the rear panel has four type so-239 connectors (one for input and 3 for outputs), three screw terminal connections (for long-wire and open-wire feeder systems), and a ground postwatts average continuous duty, watts pep reads vswr or forward power, watts or wattswith the drake b- accessory balun, tunes feed point impedances of 40 to ohms, or 5:l vswr referenced to 200 ohms (3:l on 10 meters)• no somos tienda físicapérdida de inserción: utilizando las posiciones más cercanas de la banda con una pequeña dimensiones: reducción en la coincidencia capacidadpanel trasero impedancias del punto de alimentación hacia arriba conectores: a 5: l vswr referenciado a 50 ohmios además, 5: l referenciado a 200 ohmios con el accesorio drake b- balun (3: l en 10 metros)vatios promedio servicio continuo, vatios pep lee vswr o reenvía potencia, vatios o vatiosbanda interruptor marcado para 160, metro: y 10 bandas de aficionados de metro; sin embargo, la precisión del vatímetro de frecuencia: la cobertura entre bandas amateur es posible(5 kg) proveer para el adjusb de resistencia y sintonización reactiva, antena conmutación, conmutación de banda, calibración vswr, y selección de vatios o funciones vswr del medidor el panel trasero tiene cuatro tipo conectores so-239 (uno para entrada y 3 para salidas), tres terminales de tornillo conexiones (para alambre largo y alambre abierto sistemas de alimentación), y poste de tierra 1-2• aceptamos mercado pago y transferenciasband switch marked for 160, meter: , and 10 meter amateur bands; however, frequency wattmeter accuracy: coverage between amateur bands is possible insertion loss: by using the nearest band positions with a small dimensions: reduction in matching capabilityalso, 5:l referenced to 200 ohms with the drake b- accessory balun (3:l on 10 meters)cm) profundidad: 13 incm) depth: 13 in• si no está seguro, pregunterear panel feed point impedances up connectors: to 5:l vswr referenced to 50 ohms75 ohm coaxial at front panel controls: a lower vswr can be usedse entrega por email manual del equipo en pdf 1-250 ohm coaxial con vswr de 5: l o menos en cualquier ángulo de fase (3: 1 en 10 metros)con el drake b- accesorio balun, tonos impedancias del punto de alimentación de 40 a ohmios, o 5: l vswr referenciado a 200 ohmios (3: l en 10 metros)50 ohms (resistive)f 5% of reading + 1% of full scale5 db o menos en cada banda después de sintonizar• no aceptamos devoluciones• somos personas serias y responsablesespecificaciones5 cm) width: in• hacemos envíos por mrw y domesa con cobro en destinocapacidad de potencia: cobertura de frecuencia: impedancia de entrada: impedancia de carga: líneas de alimentación balanceadas: antenas de cable largo: 15 cm) ancho: in5 db or less on each band after tuning• antes de comprar, haga todas las preguntas necesarias(33 cm) including connectors• pasados 5 días, toda compra no concretada será calificada negativacoaxial de 75 ohmios en los controles del panel frontal: un vswr menor puede ser usado(33 cm) incluyendo conectores50 ohmios (resistivo)(5 kg) provide for the adjusb ment of resistive and reactive tuning, antenna switching, band switching, vswr calibration, and selection of watts or vswr functions of the meter

  • Power capability: frequency coverage: input impedance: load impedance: balanced feedlines: long-wire antennas: 1f 5% de lectura + 1% de escala completa50 ohm coaxial with vswr of 5:l or less at any phase angle (3:l on 10 meters)the rear panel has four type so-239 connectors (one for input and 3 for outputs), three screw terminal connections (for long-wire and open-wire feeder systems), and a ground postwatts average continuous duty, watts pep reads vswr or forward power, watts or wattswith the drake b- accessory balun, tunes feed point impedances of 40 to ohms, or 5:l vswr referenced to 200 ohms (3:l on 10 meters)• no somos tienda físicatuner de antena para radios hf drake mn poco uso con manual en archivo pdf • antes de comprar, haga todas las preguntas necesariaspérdida de inserción: utilizando las posiciones más cercanas de la banda con una pequeña dimensiones: reducción en la coincidencia capacidadpanel trasero impedancias del punto de alimentación hacia arriba conectores: a 5: l vswr referenciado a 50 ohmios además, 5: l referenciado a 200 ohmios con el accesorio drake b- balun (3: l en 10 metros)vatios promedio servicio continuo, vatios pep lee vswr o reenvía potencia, vatios o vatiosbanda interruptor marcado para 160, metro: y 10 bandas de aficionados de metro; sin embargo, la precisión del vatímetro de frecuencia: la cobertura entre bandas amateur es posible(5 kg) proveer para el adjusb de resistencia y sintonización reactiva, antena conmutación, conmutación de banda, calibración vswr, y selección de vatios o funciones vswr del medidor el panel trasero tiene cuatro tipo conectores so-239 (uno para entrada y 3 para salidas), tres terminales de tornillo conexiones (para alambre largo y alambre abierto sistemas de alimentación), y poste de tierra 1-2• aceptamos mercado pago y transferenciasalso, 5:l referenced to 200 ohms with the drake b- accessory balun (3:l on 10 meters)cm) profundidad: 13 incm) depth: 13 in• si no está seguro, pregunterear panel feed point impedances up connectors: to 5:l vswr referenced to 50 ohms75 ohm coaxial at front panel controls: a lower vswr can be used50 ohm coaxial con vswr de 5: l o menos en cualquier ángulo de fase (3: 1 en 10 metros)con el drake b- accesorio balun, tonos impedancias del punto de alimentación de 40 a ohmios, o 5: l vswr referenciado a 200 ohmios (3: l en 10 metros)50 ohms (resistive)f 5% of reading + 1% of full scale5 db o menos en cada banda después de sintonizar• no aceptamos devoluciones• somos personas serias y responsablesespecificacionesband switch marked for 160, meter: , and 10 meter amateur bands; however, frequency wattmeter accuracy: coverage betweenamateur bands is possible insertion loss: by using the nearest band positions with a small dimensions: reduction in matching capability5 cm) width: in• hacemos envíos por mrw y domesa con cobro en destinocapacidad de potencia: cobertura de frecuencia: impedancia de entrada: impedancia de carga: líneas de alimentación balanceadas: antenas de cable largo: 15 cm) ancho: in5 db or less on each band after tuning(33 cm) including connectors• pasados 5 días, toda compra no concretada será calificada negativacoaxial de 75 ohmios en los controles del panel frontal: un vswr menor puede ser usado(33 cm) incluyendo conectores50 ohmios (resistivo)(5 kg) provide for the adjusb ment of resistive and reactive tuning, antenna switching, band switching, vswr calibration, and selection of watts or vswr functions of the meter

  • Rated load impedance 8¿ speaker complement one 8¿ special design 10" speaker (p/n ) dimensions height: 15acepto cambio por samsung j6 en excelentes condiciones!!! power requirements 38w 220 vac input impedance >1m¿ nominal input level 100 mv power output 30w r4 cm) width: 17 in6 cm) weight 25 lbs

  • Rated load impedance 8¿ speaker complement one 8¿ special design 10" speaker (p/n 036502) dimensions height: 15acepto cambio por samsung j6 en excelentes condiciones!!! power requirements 38w 220 vac input impedance >1m¿ nominal input level 100 mv power output 30w r4 cm) width: 17 in6 cm) weight 25 lbs

    Libertador-Aragua (Aragua)

  • 4vrms (for full rated power at 4 ohms) frequency response (at 1w, 20 hz - 20 khz) + 0 db, -1 db signal to noise ratio (a-weighted) >103 db (rated as dbr to full rated 8 ohm power output) intermodulation distortion (60 hz and 7 khz at 4:1, from full rated output to -30 db) damping factor (8 ohms, 10 hz to 400 hz) >200 crosstalk (below rated power) 20 hz to 1 khz >85 db, >55 db input impedance (nominal) 20k ohms balanced, 10k ohms unbalanced load impedance 2 to 8 ohms per channel in stereo, 4 to 8 ohms in bridge mono ac line voltage and frequency configurations available (+/- vac 60 hz, 100 vac hz, 220 and 240vac 50 hz dimensions 19" x 32 kg) iec power connector 15a thd > 0specifications sensitivity 19 kg) shipping weight 135% somos tienda fisica en san crsitobal

  • 4vrms (for full rated power at 4 ohms) frequency response (at 1w, 20 hz - 20 khz) + 0 db, -1 db signal to noise ratio (a-weighted) >103 db (rated as dbr to full rated 8 ohm power output) intermodulation distortion (60 hz and 7 khz at 4:1, from full rated output to -30 db) damping factor (8 ohms, 10 hz to 400 hz) >200 crosstalk (below rated power) 20 hz to 1 khz >85 db, >55 db input impedance (nominal) 20k ohms balanced, 10k ohms unbalanced load impedance 2 to 8 ohms per channel in stereo, 4 to 8 ohms in bridge mono ac line voltage and frequency configurations available (+/- vac 60 hz, 100 vac hz, 220 and 240vac 50 hz dimensions 19" x 39 kg) shipping weight 151 kg) iec power connector 15a thd > 05% somos tienda fisica en san cristobal tariba haga sus preguntas antes de ofertar el precio es en disney

  • Rated load impedance 8¿ speaker complement one 8¿ special design 10" speaker (p/n 036502) dimensions height: 15excelentes condiciones!!! power requirements 38w 220 vac input impedance >1m¿ nominal input level 100 mv power output 30w r4 cm) width: 17 in6 cm) weight 25 lbs

    Libertador-Aragua (Aragua)

  • Rated load impedance 8¿ speaker complement one 8¿ special design 10" speaker (p/n ) dimensions height: 15excelentes condiciones!!! power requirements 38w 220 vac input impedance >1m¿ nominal input level 100 mv power output 30w r4 cm) width: 17 in4 kg) 180 aguacates6 cm) weight 25 lbs

  • load impedance: 600 ohm: maxhaga todas sus preguntas con confianza, solo apriete "comprar" cuando este 100% seguro *******somos tienda física, contamos con punto de venta******* despachamos por zoom y tealca, los envíos, corren por cuenta y riesgo del cliente toda compra que no se concrete en un lapso de 48 horas sera cancelada y se dará calificación negativa al comprador ***********************gracias por su preferencia****************************** descripción del articulo: type: active balanced impedance: 20k ohm max25db 20hz-20khz: im distortion (smpte): thd (20hz-20khz): equivalent input noise (20hz-20khz):- 96dbu filters type: constant q/wein-bridge number: 2 x 15 bandwidth: 2/3 octave iso center tolerance: ±3% range: ±15db subsonic filter: 12db/octave @ 40hz power requirements: 120vac, 50-60hz, 12w shipping weight: 10 lbs dimensions: 19"l x 3level: +22dbu output type: servo-balanced minlevel: +22dbu frequency response ±5"h x 6"d i/o connectors: xlr, 1/4", and barrier strip precio real 148 dls recibimos tasa diaria

    Barquisimeto (Lara)

  • 5mv (mm), 150mv (line) signal to noise ratio: 72db (mm), 90db (line) output: 130mv (line) speaker load impedance: 8¿ (minimum) dimensions: 430 x 118 x 245mm weight: 4kgamplificador sansui a505 power output: 150 watts per channel into 8¿ (stereo) frequency response: 10hz to 50khz total harmonic distortion: 007% input sensitivity: 2

  • 09% damping factor: 30 input sensitivity: 3mv (mm), 200mv (line) signal to noise ratio: 80db (mm), 85db (line) channel separation: 55db (line) output: 200mv (line) speaker load impedance: 4¿ to 16¿ digital inputs: coaxial, optical video connections: composite dimensions: 430 x 158 x 375mm weight: 9adjunto las características de cada uno: características del amplificador sa-dx950: tuning range: fm, mw power output: 100 watts per channel into 6¿ (stereo) surround output: 100w (front), 100w (center), 100w (rear) frequency response: 10hz to 40khz total harmonic distortion: 08kg accessories: remote control características del ecualizador sh-: signal to noise ratio: 110db total harmonic distortion: % control range: ± 12db frequency bands: k, 2se vende amplificador sa-dx950 con su control remoto (le falta la tapa de la batería) junto al ecualizador sh-, y de obsequio unas cornetas3k, 16khz dimensions: 430 x 85 x 200mm weight: 2kg pregunte todo lo que quiera antes de ofertar

  • 5mv (mm), 150mv (line) signal to noise ratio: 72db (mm), 90db (line) output: 130mv (line) speaker load impedance: 8hms dimensions: 430 x 118 x 245mm weight: 4kgremato amplificador sansui vatios factura y garantia power output: watts pmpo (150w rms) frequency response: 10hz to 50khz total harmonic distortion: 007% input sensitivity: 2

  • 5mv (mm), 200mv (line) signal to noise ratio: 74db (mm), 95db (line) output: 200mv (line) speaker load impedance: 8¿ to 16¿ dimensions: 430 x 135 x 300mm weight: 68% input sensitivity: 2planta amplificador de sonido casera sony con control remoto, tuner (radio fm, am, memoria permanente) usada pero en excelentes condiciones, practicamente nueva especificaciones marca: sony str-d390 am/fm stereo receiver tuning range: fm, mw power output: 40 watts per channel into 8 ohmios (stereo) frequency response: 10hz to 50khz total harmonic distortion: 05kg accessories: rm-u223/rm-s103 remote control imputs: phono, cd, video, tape 1, 2 outputs: rec out, video (audio) out, speaker a, b, headphones

  • 5mv (mm), 150mv (line) signal to noise ratio: 78db (mm), 97db (line) output: 150mv (line) speaker load impedance: 4¿ to 16¿ dimensions: 441 x 146 x 334mm weight: 908% damping factor: 40 input sensitivity: 2planta amplificador estereo integrado technics su- (usada) en perfectas condiciones especificaciones: power output: 41 watts per channel into 8¿ (stereo) frequency response: 20hz to 20khz total harmonic distortion: 0

  • 5mv (mm), 150mv (line) signal to noise ratio: 77db (mm), 100db (line) channel separation: 65db (mm), 73db (line) output: 150mv (line), 1v (pre out) speaker load impedance: 8¿ (minimum) semiconductors: 51 x transistors, 25 x diodes, 2 x fet dimensions: 430 x 110 x 340mm weight: 9specifications 317 power output: 50 watts per channel into 8¿ (stereo) frequency response: 5hz to 70khz total harmonic distortion: 0amplificador sansui modelo au-317, perfecto estado03% damping factor: 70 input sensitivity: 20mv (mic), 2

  • 1mv (ceramic), 180mv (line) signal to noise ratio: 80db (mm), 95db (line) speaker load impedance: 4¿ to 16¿ semiconductors: 2 x fet, 29 x transistors, 7 x diodes dimensions: 405 x 140 x 339mm weight: 123kg esperamos por su oferta graciaso su equivalente en s- a como se cotiza en el dia saludos description the pioneer sa-900 has high performance pre-amplifiers and power amplifier stages for large output, an extremely high signal to noise ratio and an accurate equaliser characteristicspecifications power output: 500 watts per channel into 8¿ (stereo) frequency response: 25hz to 40khz total harmonic distortion: 0antes de ofertar por favor hacer todas las preguntas necesarias costo real3% damping factor: 50 input sensitivity: 1planta amplificador pioneer sa-900 en muy buenas condiciones, funciona perfecto solo hacerle mantenimiento a los contactos o pulirlos completamente original

    Valencia (Carabobo)

  • 05% damping factor: 30 input sensitivity: 3mv (mm), 200mv (line) signal to noise ratio: 80db (mm), 85db (line) channel separation: 55db (line) output: 200mv (line) speaker load impedance: 4¿ to 16¿ video connections: composite -dimensions: 430 x 158 x 358mm weight: 10lo vendo por irme del pais 100$ especificaciones tuning range: fm, mw power output: 65 watts per channel into 8¿ (stereo) surround output: 60w (front), 60w (center), 60w (rear), 60w (sub) frequency response: 10hz to 40khz total harmonic distortion: 0a la venta amplificador o planta marca technics modelo sa-ex700, excelente amplificardor para casa en excelentes condiciones 100% operativo listo para destruir los vidrios de las casas, se puede conectar 4 cornetas mas un bajo y un center, ademas se puede conectar a te mezcladores, rockolas, entre otros3kg aceptamos pagos: mercado pago (mp) banesco banco de venezuela mercantil provincial exterior tesoro bicentenario nota: los pagos realizados desde “otros bancos” serán confirmados antes de enviar la mercancía

    Baruta (Miranda)

  • 9mv (mm), 120mv (line) signal to noise ratio: 70db (mc), 77db (mm), 100db (line) output: 120mv (line), 1v (pre out) speaker load impedance: 4¿ to 16¿ semiconductors: 55 x transistors, 11 x ic, 8 x fet, 42 x diodes dimensions: 445 x 128 x 370mm weight: 13specifications power output: 75 watts per channel into 8¿ (stereo) frequency response: 20hz to 20khz total harmonic distortion: 001% damping factor: 80 input sensitivity: 0

    Maracay (Aragua)

  • 5mv (mm), 150mv (line) signal to noise ratio: 74db (mm), 92db (line) output: 150mv (line) speaker load impedance: 6¿ to 16¿ video connections: composite dimensions: 434 x 142 x 315mm weight: 708% input sensitivity: 2specifications tuning range: fm, mw "100 trumps" power output: 50 watts per channel into 8¿ (stereo) surround output: 50w (front), 50w (center), 15w (rear) frequency response: 10hz to 50khz total harmonic distortion: 06kg sin remote control

  • Amplificador pioneer sa-540 stereo integrated amplifier () add a review add a review specifications power output: 40 watts per channel into 8¿ (stereo) frequency response: 20hz to 20khz speaker load impedance: 6¿ to 16¿ dimensions: 420 x 290 x 100mm weight: 55 to 108 mhz mw tuning range: 522 to khz lw tuning range: 153 to 360 khz sensitivity: 05mv (mic) output: 045v (line) year: ecualizador pioneer sg-540 stereo graphic equalizer () specifications output level: 1v (6v max) gain: ± 0db frequency response: 5hz to 70khz signal to noise ratio: 100db total harmonic distortion: % control range: ± 10db frequency bands: k, 24k, 6k, 15khz dimensions: 420 x 97 x 216mm weight: 26kg year: deck pioneer ct-940 stereo cassette tape recorder description the pioneer ct-940 tape deck features music search (ms) and record mute (rm) functions along with dolby b and c type noise reduction, a four figure electronic tape counter and headphone socket8kg year: radio pioneer tx-940 am/fm digital synthesized tuner () specifications 940l type: mono/stereo tuner tuning bands: fm, mw, lw tuning scale: digital fm tuning range: 8795uv (fm), 250uv (mw), uv (lw) signal to noise ratio: 80db (fm), 50db (mw), 50db (lw) distortion: 0specifications type: 2-head, single compact cassette deck track system: 4-track, 2-channel stereo tape speed: 408% (fm) selectivity: 56db (fm), 40db (mw), 40db (lw) frequency response: 30hz to 15khz (fm) output: 700mv (fm), 150mv (mw), 150mv (lw) dimensions: 420 x 60 x 223mm weight: 276 cm/s heads: 1 x record/playback, 1 x erase motor: 1 x reel, 1 x capstan tape type: type i, cro2, metal noise reduction: b, c input: 300mv (line), 0

  • 5mv (mm), 150mv (line) signal to noise ratio: 74db (mm), 92db (line) output: 150mv (line) speaker load impedance: 6¿ to 16¿ video connections: composite dimensions: 434 x 142 x 315mm weight: 7specifications tuning range: fm, mw 100 ó al cambio power output: 50 watts per channel into 8¿ (stereo) surround output: 50w (front), 50w (center), 15w (rear) frequency response: 10hz to 50khz total harmonic distortion: 0100 ó al cambio08% input sensitivity: 26kg sin remote control

    Anzoátegui (Cojedes)

¿No has encontrado lo que buscas? Prueba otra búsqueda

Busquedas relacionadas load impedance