Ohms frequency response
Listado ohms frequency response
-
4vrms (for full rated power at 4 ohms) frequency response (at 1w, 20 hz - 20 khz) + 0 db, -1 db signal to noise ratio (a-weighted) >103 db (rated as dbr to full rated 8 ohm power output) intermodulation distortion (60 hz and 7 khz at 4:1, from full rated output to -30 db) damping factor (8 ohms, 10 hz to 400 hz) >200 crosstalk (below rated power) 20 hz to 1 khz >85 db, >55 db input impedance (nominal) 20k ohms balanced, 10k ohms unbalanced load impedance 2 to 8 ohms per channel in stereo, 4 to 8 ohms in bridge mono ac line voltage and frequency configurations available (+/- vac 60 hz, 100 vac hz, 220 and 240vac 50 hz dimensions 19" x 32 kg) iec power connector 15a thd > 0specifications sensitivity 19 kg) shipping weight 135% somos tienda fisica en san crsitobal
-
4vrms (for full rated power at 4 ohms) frequency response (at 1w, 20 hz - 20 khz) + 0 db, -1 db signal to noise ratio (a-weighted) >103 db (rated as dbr to full rated 8 ohm power output) intermodulation distortion (60 hz and 7 khz at 4:1, from full rated output to -30 db) damping factor (8 ohms, 10 hz to 400 hz) >200 crosstalk (below rated power) 20 hz to 1 khz >85 db, >55 db input impedance (nominal) 20k ohms balanced, 10k ohms unbalanced load impedance 2 to 8 ohms per channel in stereo, 4 to 8 ohms in bridge mono ac line voltage and frequency configurations available (+/- vac 60 hz, 100 vac hz, 220 and 240vac 50 hz dimensions 19" x 39 kg) shipping weight 151 kg) iec power connector 15a thd > 05% somos tienda fisica en san cristobal tariba haga sus preguntas antes de ofertar el precio es en disney
-
25 vrms @8 ohms input impedance 20 kohms, balanced 10 kohms, unbalanced gain 36db (@8 ohms) frequency response 20 hz - 20 khz, -0amplificador qsc plx poco uso el precio es negociable rating @ 1 khz, thd=w @ 4 ohms stereo (per channel) 775w @ 8 ohms stereo (per channel) w @ 2 ohms stereo (per channel) w @ 8 ohms bridged-mono w @ 4 ohms bridged-mono rating @ 20 hz - 20 khz, thd=w @ 4 ohms stereo (per channel) 725w @ 8 ohms stereo (per channel) w @ 8 ohms bridged-mono damping factor >500 input sensitivity 15db signal-to-noise ratio -107db (20 hz - 20 khz) total harmonic distortion (thd)
-
Especificaciones: total harmonic distortion: less than hz - 20khz @ 8 ohms) frequency response: (+/-01db, @rated output power, 8 ohms): 20hz - 20k hz slew rate: 15v per usec damping factor @ 8 ohm: 300 impedance: 20k ohms balanced / 10k ohms unbalanced cooling system: 2 indivdual fans special features: high/low pass filter / input sensitivity selector / ground lift / limiter dimensions (lxwxh): 14" x 19" x x 482 x 88mm 2-rack mount spaces weight: 42 lbs1% thd (bridge mode, mono) w rms @ 8 ohms, 1k hz, 1% thd trabajamos con banesco y bod entregas personales solo en maracaibo, edola oferta es un compromiso de pago1% thd 500w rms per channel @ 8 ohms, 1khz, 0zulia se realizan envĂos por mrw y tealca realice todas las preguntas necesarias antes de ofertarsalida de poder: 750w rms per channel @ 4 ohms, 1khz, 0
-
Specifications total harmonic distortion: less than hz - 20khz @ 8 ohms) frequency response: (+/-01db, @rated output power, 8 ohms): 20hz - 20k hz slew rate: 15v per usec damping factor @ 8 ohm: 300 impedance: 20 ohms balanced / 10 ohms unbalanced cooling system: 2 indivdual fans special features: high/low pass filter / input sensitivity selector / ground lift limiter dimensions (lxwxh): 14" x 19" x x 482 x 88mm 2-rack mount spaces weight: 33 lbszulia se realizan envĂos por mrw y tealca realice todas las preguntas necesarias antes de ofertarla oferta es un compromiso de pagooutput power: 300w rms per channel @ 4 ohms, 1khz, 01% thd 200w rms per channel @ 8 ohms, 1khz, 01% thd (bridge mode, mono) 600w rms @ 8 ohms, 1k hz, 1% thd trabajamos con banesco y bod entregas personales solo en maracaibo, edo
-
12" subwoofer with dual 4-ohm voice coils injection-molded polypropylene cone ribbed santoprene rubber surround suitable for marine use power handling: watts rms (200 watts per coil) 800 watts peak power handling frequency response: hz sensitivity: 86ofertar si realmente esta seguro de comprar evite ser calificado negativo especificaciones 15" subwoofer with dual 4-ohm voice coils injection-molded polypropylene cone ribbed santoprene rubber surround suitable for marine use power handling: watts rms (250 watts per coil) watts peak power handling frequency response: hz sensitivity: 891 db top-mount depth: 8-1/8" sealed box volume: cubajos kicker (el modelo mas buscado para cajones turbo) disponibles en 12 pulgadas y 15 pulgadas 100 % originales somos distribuidores de la marca kicker precio 130 $$ de 12 pulgadasmodelo 07cvr wts) 500 rms el precio es por la unidad somos tienda fisica en maracaytrabajamos de lunes a viernes de 8 am a 2 pm puede retirar personalmente7 db top-mount depth: 6-1/4" sealed box volume: cuse hacen envios a nivel nacional por cuenta del clienteported box volume: cumodelo 07cvr wts) 400 rms precio 160 $$ de 15 pulgadas
-
Especificaciones: nominal impedance:      8 ohms frequency response:     k hz high-freqdispersion:    90 x 40 x-over points:           16k hz power handling:         300 watts spl @ 1w1m:           97db peak spl:               128 db dimensions (w”x h” x d”):19 x 27 x 17 weight (lbs):             66 excelentes condiciones: producto profesional b-52 de alta definicion, comparable con las mejores marcas:                       jbl, peavey, cerwinvega, yamaha entregas a destino: mrw, domesa, zoom, otros realice todas las preguntas que desee se aceptan tranferencias a bbva provincial y banesco banco universal
-
83v@1m) 88db nominal impedance8 ohms frequency response(-10db) 38hz – 20khz speaker specifications low-frequency transducer6-1/2" titanium-laminate cone w/rubber surround high-frequency transducer1" titanium-laminate dome, w/elliptical oblate spheroidal™ waveguide andswivel mount midrange transducer80 dimensions plate widthmm) plate heightmm) mounting cutout widthmm) mounting cutout heightmm) mounting depthmm) weight5lb (28khz sensitivity(2jbl sp6ii 180$ o al cambio del dĂa watts general specifications seriessoundpoint series audio specifications crossover frequencies2
-
83v@1m) 88db nominal impedance8 ohms frequency response(-10db) 38hz – 20khz speaker specifications low-frequency transducer6-1/2" titanium-laminate cone w/rubber surround high-frequency transducer1" titanium-laminate dome, w/elliptical oblate spheroidal™ waveguide andswivel mount midrange transducer80 dimensions plate widthmm) plate heightmm) mounting cutout widthmm) mounting cutout heightmm) mounting depthmm) weight5lb (28khz sensitivity(2jbl sp6ii 160$ o equivalente en bsal cambio del dĂa el precio es por el par de cornetas watts general specifications seriessoundpoint series audio specifications crossover frequencies2
-
83v@1m) 91db nominal impedance 2 ohms frequency response 65hz–21khz power handling (rms) 45w speaker specifications low-frequency transducer plusone® hcl™ honeycomb-laminate cone crossover frequencies onboard high-frequency transducer 25mm (1") edge-driven my-ti™ dome, pivoting controls/adjustments hf cut: 0db/-3db dimensions mounting cutout diameter (mm) 120 mounting cutout diameter (in) 4-3/4 mounting depth (mm) 58 mounting depth (in) 2-1/4 external diameter (mm) 130 external diameter (in) 5-1/8precio 70 $$ o al cambio del dia somos tienda fisica !!!! en maracay trabajamos de lunes a viernes de 8 am a 2 pm puede retirar personalmente se hacen envios a nivel nacional por cuenta del cliente exelente calidad y nitidez en sonido jbl oferte si esta seguro de comprar evite calificaciones negativas especificaciones medida: 5 1/4 general specifications size 5-1/4" series grand touring type two-way audio specifications power handling (peak) 135w sensitivity (2
-
5” danom punta de bala max power 320 watts rms power 160 watts sensitivity 97 db impedance 8 ohms frequency response khz
-
4 ohms ±10% • crossover network4 ohms ±10% • high frequency cm” titanium dome transducer: (dt397th-1) blu wht wht input l• acoustic & electrical specifications: • nominal impedance: 6 ohms4 ohms ±10% • crossover network: cm62 (wi) aural sweep test specifications: a) acoustic & electrical specifications: • nominal impedance: 6 ohms • max amp power: 175 watts • frequency response: 45 hz – 20 khz • sensitivity: 89 db 1 watt @ 1 meter • crossover frequency: 3 khz system components: • cabinet: cm62 (not for sale) • grille: cm62 (black) wi-b (white) wi-w • low frequency cm” shielded transducer: polylaminate cone (cm62wo) dc resistance: 3estupendas cornetas jbl control cm62 altĂsima calidad buen sonido se le cambio las suspensiones o fuelle funcionamiento perfecto se le prueba en la entrega no se hacen cambalache• max amp power0v input, 60 hz to 4 khz clmp(2) system components: (cont'd) • dc resistance: 30v input, 60 hz to 20 khz bsystem aural sweep test: 4despuĂ©s hacer la compra tiene tres dĂas para concretar) each (sold in pair2µf 100v cµf 100v c2 16µf 100v l1 system components: (cont’d) 0(h x w x d) (390mm x 243mm x 262mm) weight: 11 lbsaural sweep test: 2caracterĂsticas • technical manual0v input, 2 khz to 20 khz physical specifications: • enclosure dimensions: x 9 1/2 x 9 1/4 inaural sweep test: 3system aural sweep test) 120 lechugones…15mh lmh lmh dc resistance: 3• • enclosure dimensions: x 9 1/2 x 9 1/4 in
-
4 ohms ±10% • crossover network4 ohms ±10% • high frequency cm” titanium dome transducer: (dt397th-1) blu wht wht input l• acoustic & electrical specifications: • nominal impedance: 6 ohms4 ohms ±10% • crossover network: cm62 (wi) aural sweep test specifications: a) acoustic & electrical specifications: • nominal impedance: 6 ohms • max amp power: 175 watts • frequency response: 45 hz – 20 khz • sensitivity: 89 db 1 watt @ 1 meter • crossover frequency: 3 khz system components: • cabinet: cm62 (not for sale) • grille: cm62 (black) wi-b (white) wi-w • low frequency cm” shielded transducer: polylaminate cone (cm62wo) dc resistance: 3estupendas cornetas jbl control cm62 altĂsima calidad buen sonido se le cambio las suspensiones o fuelle funcionamiento perfecto se le prueba en la entrega no se hacen cambalache• max amp power0v input, 60 hz to 4 khz clmp(2) system components: (cont'd) • dc resistance: 30v input, 60 hz to 20 khz b) 110 lechugones…system aural sweep test: 4despuĂ©s hacer la compra tiene tres dĂas para concretar) each (sold in pair2µf 100v cµf 100v c2 16µf 100v l1 system components: (cont’d) 0(h x w x d) (390mm x 243mm x 262mm) weight: 11 lbsaural sweep test: 2caracterĂsticas • technical manual0v input, 2 khz to 20 khz physical specifications: • enclosure dimensions: x 9 1/2 x 9 1/4 inaural sweep test: 3system aural sweep test15mh lmh lmh dc resistance: 3• • enclosure dimensions: x 9 1/2 x 9 1/4 in
-
1 ohms - dc resistance: 4mm - nominal impedance: 8 ohms - minimum impedance: 575t) especificaciones pyle pro midrange/tweeter compression horn driver titanium diaphragm mm) flat aluminum voice coil 30 oz magnet structure frequency response: 500hz - 18khz sensitivity: 107db @ 1w/1m 8 ohm impedance 300 watts rms/600 watts peak terminals 205 type fits horns with 1 3/8'' x 18 tpi threads sold as: single weight: 57 ohms - power capacity hz to hz: 280 w peak 140 w program 70 w continuous using pink noise band limited from hz to 20 khz (aes ) - power capacity 500 hz to hz: 240 w peak 120 w program 60 w continuous using pink noise band limited from 500 hz to 20 khz - sensitivity: 111 db spl 1 watt at 1 meter on-axis on 90Âş h x 45Âş v horn - nominal efficiency: 30% - frequency response: 500 hz to hz - recommended crossover: hz at 12 db / octave - lowest recommended crossover: 500 hz at 12 db / octave - diaphragm: commercially pure titanium - voice coil diameter: mm - voice coil material: edge-wound copper-clad aluminum ribbon with a high temp composite bobbin - flux density: gauss (1el precio publicado es por cada unoespecificaciones peavey 2" - throat parameter
-
5" precio: dayton audio dc28f- silk dome tweeter product specifications • tweeter typesoft dome • cone / dome diameter1-1/8" • impedance8 ohms • power handling (rms)50 watts • resonant frequency (fs): 834 hz • frequency response to hz • sensitivity89 db 1w/1m • price: 392 dayton audio st" series ii woofer product specifications • nominal diameter8" • power handling (rms)180 watts • power handling (max)360 watts • impedance8 ohms • frequency response45 to hz • sensitivity90 db 1w/1m • resonant frequency (fs) 44• price: dayton audio pk" professional kevlar/paper cone midrange speaker product specifications • nominal diameter6" • power handling (rms)100 watts • power handling (max)200 watts • impedance8 ohms • frequency response95 to hz • sensitivity925$ total en cornetas: $7 db 1w/1m • resonat frecuancy: 91,5hz • voice coil diameter 14 hz • voice coil diameter2" • magnet weight 38 oz
-
5" precio: dayton audio dc28f- silk dome tweeter product specifications • tweeter typesoft dome • cone / dome diameter1-1/8" • impedance8 ohms • power handling (rms)50 watts • resonant frequency (fs): 834 hz • frequency response to hz • sensitivity89 db 1w/1m • price: 392 dayton audio st" series ii woofer product specifications • nominal diameter8" • power handling (rms)180 watts • power handling (max)360 watts • impedance8 ohms • frequency response45 to hz • sensitivity90 db 1w/1m • resonant frequency (fs) 44• price: dayton audio pk" professional kevlar/paper cone midrange speaker product specifications • nominal diameter6" • power handling (rms)100 watts • power handling (max)200 watts • impedance8 ohms • frequency response95 to hz • sensitivity92guitarras y amplificadores (dependiendo)laptos 15" i5 para arriba5$ total solamente en cornetas: $ cambios: pc completa desde i5 para arriba7 db 1w/1m • resonat frecuancy: 91,5hz • voice coil diameter 14 hz • voice coil diameter2" • magnet weight 38 oz
-
Max power w •   12" woofer with dual 4-ohm voice coils •   urethane surround •   dragon spider design •   2-layer voice coil design •   dual magnet drive •   8awg wire capable push terminals •   frequency response: hz •   sensitivity: 85 db •   mounting depth: " •   peak input power: w •   rated input power: 400w •   impedance: 4 ohms + 4 ohms •   sensitivity: 85db •   free-air resonance: 28hz •   frequency response: 35hz – 300hz ¡precio por unidad!
-
Clever thinking by art! crystal-clear sound your input signal is reproduced with amazing clarity, allowing you to make remarkably high-quality recordings with a maximum output of 70 db! the art tube mp project series microphone preamplifier is the perfect partner for professional audio work! caracterĂsticas del producto compact microphone preamplifier tube type: selected 12ax7a tube suitable for mics and other instruments frequency range: (-100 db): 20 hz to 20 khz) frequency response: 10 hz to 40 khz input impedance: 300 ohms (xlr female balanced), 1 meg ohms (jack) output impedance: 600 ohms (xlr male balanced) 300 ohms (jack) gain: maximum 70 db (xlr - xlr), +50 db (jack - xlr) gain pad: switchable, 20 db maximum input volume: +17 dbu (xlr), +16 dbu (jack) maximum output volume: +20 dbu (xlr), +26 dbu (jack) xlr input impedance: switchable, 47 ohms (xlr), 840 kohms (jack) low cut filter: switchable, -3 db at 40 hz output phase: switchable output limiter type: switchable phantom power: 48v switchable signal indicator: led robust aluminium housing dimensions: 150 x 165 x 44what's more, there are special grooves on the housing as well as the strips which makes it possible to stack units on top of each othertheir tube mp project series microphone preamplifier is also high-quality that allows you to connect guitars, keyboards and electronic drum kits to your mixersleek and sturdy design the technical components of this device are contained in a rugged aluminium housingviene en su caja incluye adaptador de corrienteoutgoing volume is indicated with bright leds14 kg entrega jnmediatarubber strips on the underside ensure extra grip on your desk top or flight casefotos reales zelle ref 90art project series general art products deliver professional audio qualityart has integrated user-friendly buttons and switches which are easy to operateprofessional microphone / instrument tube preamplifier
-
3 ohms input connectors: parallel 1/4-inch phone jacks enclosure finish: black carpeted dimensions, height: 76se venden por par 300 watts rms specifications: frequency response, measured at 10 feet on axis (normalized to 1 watt/ 1 meter): hz ±3 db long-term average power handling, eia standard rs-426-a: 350 watts sound pressure level, 1 w/1 m: 99 db dispersion angle included by 6-db down points on polar responses, indicate one-third-octave bands of pink noise, hz - hz, horizontal: hz - hz, vertical: °) transducer complement: high frequency: dha - hp64m constant directivity low frequency: dl15bfh enclosure tuning: 50 hz crossover frequency: hz impedance: nominal 8 ohms - minimum 5gracias por su compra4 kg (76 lbs) shipping weight: 38nunca reparadas el precio es por una corneta) net weight: 341 kg (84 lbs) no incluye embalaje ni envĂo trabajo con banco de venezuela y mercantil entrega en local comercial o envĂo por domesa o zoom recuerde que al ofertar tendrá 3 dĂas para concretar la ventacornetas electrovoice eliminator usadas en perfecto estado de funcionamiento en caso contrario será calificado negativo
-
Mylar bypass capacitors in the crossovers extend high frequency response and improve detail and transparencydynamic balance polymer composite drivers for smooth wide-range response with low distortionespecificaciones: driver complement tweeter quantity 1 diameter cm) type silk/polymer composite dome mid / woofer quantity 2 diameter cm) type polymer composite dynamic balance cones with rubber surrounds electrical total frequency response 45hz-27khz upper -3db limit 26 khz lower -3db limit 55 hz nominal impedance 8 ohms efficiency 90 db recommended amplifier power  watts per channel inputs dual (bi-amp) gold plated 5-way binding posts amplifier specs amplifier type 0 dimensions cabinet dimensions height cm) width cm) depth cm) enclosure type mid-high array enclosure type vented via rear panel power port and front panel arc port shipping unit of measure each total shipping weight  pounds haga todas las preguntas necesarias antes de ofertar!!!  se puede retirar personalmente previo acuerdo en lugar seguro o se puede enviar usando un motorizado externo de confianza al cual el cliente debe cancelar el flete; de lunes a viernes en horario de oficina 9:00 am a pm y 1:00pm a 4:00pmmagnetic shielding for safe placement near video sourcesacoustically inert stamped driver basketspower port bass venting for superior clean, low distortion bass that you can really feelacoustic resonance control (arc port) technology for more natural midrange reproductionbutyl rubber surrounds for high performance durabilityfloating anti-diffraction grilles minimize grille diffraction for spacious, 3-dimensional imaging para envios al interior se procesan en un lapso no mayor a 24h de estar el dinero efectivo en cuenta, se usan las empresas(mrw, zoom, tealca) con flete a destinodual, bi-ampable gold-plated 5-way binding post inputs (with wide holes for large-gauge bare wire connections) for the most secure connections and the most versatile wiring applications1" silk dome dynamic balance tweeter features a neodymium magnet for clear, detailed highs; heat-sinked for superior heat dissipation, power handling and reliabilityor, use the cs i 5's adjustable kick stand prop to balance the speaker on your shallow-depth rptv  todos los pagos pueden hacerse en efectivo(dinero cash), transferencia bancaria o depositometallic elements add a touch of modern style to these classic polk audio high performance workhorses(the cs i 5 is a truly bi-wire- and bi-amp-able center channel speaker!) timbre-matched to fit into any polk audio home theater or multi-channel music system for a more realistic, more seamless surround sound environment corneta central csi5 polkaudio color negro real wood, real high performance cs i center channel speakers easily carry the 50+% of center channel info delivered in multi-channel sources; their upside-down aim-able cabinets give you the ultimate in placement flexibility and sound-tailoring for your high performance home theater systemfloating grilles compliment the real wood finishes and softened contours of the new cs i series center channel loudspeakers"no se aceptan cheques, ni tarjeta de debito"   c190am10   turn them upside-down to aim them "up" when your placement requires them to be below your tv or video screen (it's a polk innovation we pioneered back in the 90s!)(sin excepciones)acoustically inert 3/4" mdf cabinets, finished in cherry wood or black oak veneers
-
Specifications sensitivity (volts rms) for full rated power at 4 ohms 125 frequency response (at 1 watt, 40 hz - 20 khz) +0 db, –3 db signal to noise ratio below rated power (20 hz to 20 khz, inputs terminated) a-weighted, below rated power > 100 db total harmonic distortion (thd) at 1 full bandwidth power, from 20 hz to 20 khz intermodulation distortion (imd) 60 hz and 7 khz at 4:1, from full rated output to –30 db damping factor (8 ohm): 10 hz to 400 hz > 300 crosstalk (below rated power) at 1 khz at 20 khz –76 db –58 db input impedance (nominal) (balanced, unbalanced) 20 kilohms, 10 kilohms load impedance stereo bridge mono 4 ohms 8 ohms ac line voltage and frequency configurations available (± vac 60 hz 100 vac hz 220 vac 50 hz vac 50 hz ventilation flow-through ventilation from front to back cooling internal heat sinks with forced-air cooling air volume requirements (per minute per unit) ft m3) dimensions: width, height, depth lps ,: eia standard 19"w (eia rs-310-b) x cm) h xcm) dnet weight, shipping weight lps lb (10
-
1% thd frequency response: (+/-05db, @rated output power, 8 ohms): 20hz - 20k hz total harmonic distortion: less than hz - 20khz @ 8 ohms) damping factor @ 8 ohm: 450 impedance: 20k ohms balanced / 10k ohms unbalanced cooling system: 2 high speed cooling fans special features: high/low pass filter / input sensitivity selector / ground lift / limiter dimensions (lxwxh): " x 19" x x 482 x 88mm (2 rm spaces) slew rate: 20v per usec weight: 50 lbsvendo esta planta en perfecto estado le tome foto asi para que vea que la tengo guardada1% thd 700w rms per channel @ 8 ohms, 1khz, 0la vendo por no usar antes que se dañe guardadasaludos trabajo con banco provincial solamenteprecio: 550 mil especificaciones: w rms @ 8 ohms, 1k hz, 1% thd (bridge mode, mono) w rms per channel @ 4 ohms, 1khz, 0
-
1% (20hz - 20khz @ 8 ohms) - frequency response: (+/-01db, @rated output power, 8 ohms): 20hz - 20k hz - slew rate: 15v per usec - damping factor: @ 8 ohm: 300 - impedance: 20 k ohms balanced / 10 k ohms unbalanced - cooling system: 2 individual fans - special features: high/low pass filter / input sensitivity selector / ground lift; limiter - build in clip limiter - input: xlr 3pin + jack 6,3mm - output: speaker + binding post - dimensiones (lxwxh): 360 x 482 x 88mm 2-rack mount spaces - peso:: 42 lbs1% thd 500w rms per channel @ 8 ohms, 1khz, 0descripciĂłn: - output power: 750w rms per channel @ 4 ohms, 1khz, 01% thd - bridge mode, mono 1500w rms @ 8 ohms, 1k hz, 1% thd - total harmonic distortion: less than 0
San Cristóbal (Táchira)
-
1% thd - bridge mode, mono w rms @ 8 ohms, 1k hz, 1% thd - total harmonic distortion: less than hz - 20khz @ 8 ohms) - frequency response: (+/-01db, @rated output power, 8 ohms): 20hz - 20k hz - slew rate: 15v per usec - damping factor: @ 8 ohm: 300 - impedance: 20 k ohms balanced / 10 k ohms unbalanced - cooling system: 2 individual fans - special features: high/low pass filter / input sensitivity selector / ground lift; limiter - build in clip limiter - input: xlr 3pin + jack 6,3mm - output: speaker + binding post - dimensiones (lxwxh): 360 x 482 x 88mm 2-rack mount spaces - peso:: 42 lbs1% thd 500w rms per channel @ 8 ohms, 1khz, 0descripciĂłn: - output power: 750w rms per channel @ 4 ohms, 1khz, 0
-
1% thd - bridge mode, mono w rms @ 8 ohms, 1k hz, 1% thd - total harmonic distortion: less than hz - 20khz @ 8 ohms) - frequency response: (+/-01db, @rated output power, 8 ohms): 20hz - 20k hz - slew rate: 15v per usec - damping factor: @ 8 ohm: 300 - impedance: 20 k ohms balanced / 10 k ohms unbalanced - cooling system: 2 individual fans - special features: high/low pass filter / input sensitivity selector / ground lift; limiter - build in clip limiter - input: xlr 3pin + jack 6,3mm - output: speaker + binding post - dimensions (lxwxh): 360 x 482 x 88mm 2-rack mount spaces - weight: 42 lbs1% thd 450w rms per channel @ 8 ohms, 1khz, 0output power: 675w rms per channel @ 4 ohms, 1khz, 0
-
23 v rms) for rated output, 40 kohm balanced at xlr input hum and noise: 85 db below rated output minimum load impedance: 8 ohms per channel, stereo mode 8 ohms, btl mode protection circuits: dc balance voltage protector electronic output power manual http://pdfsonido puro y limpio, especial para los que saben de audio especificaciones: output power at 8 ohms, (1 khz) 25 watts minimum rms per channel in stereo mode, both channels driven 50 watts minimum rms in btl (monophonic mode) total harmonic distortion watts, 8 ohms, stereo mode) watts, 8 ohms, btl mode) intermodulation distortion: less than hz: 7 khz (4:1) frequency response 20 hz to 20 khz, +0/-1 db at rated power output damping factor: 80 minimum, 8 ohm load, 20 hz to 20 khz input impedance and sensitivity: -10 dbv (03 v rms) for rated output, 15 kohm unbalanced at rca input +4 dbu (1com/manuals/electronics/av/brochures/pa-20mkii_faxback
-
Venelectronics - las mercedes caracterĂsticas del producto: subwoofer alphasonic psw410e 10" dual 4 ohms alpha 400 series potencia rms: 500 watts impedance: dual 4 ohm frequency response: hz diameter: 10 pulgadas stamped steel polished w/ brushed hairline finish alpha basket motor assembly heat sink high rigidity inverted dome mineral-filled composite cone epdm surround high tinsel strength two-layer surround exclusive mounting ring 8-gauge lug-lock input terminals sensitivity: 90db frequency response: 30hz - 500hz dual 4-ohm 2" voice coil depth: mm) through hole: mm) diameter: mm) dimensiones caja: 27 x 27 x 15 cm peso aproximado18 kg somos tienda fĂsica ubicada en las mercedes
-
frequency response: 56hz-22khz crossover frequency: 3 khz low-frequency amplifier power: 40 watts high-frequency amplifier power: 30 watts maximum signal-to-noise (dynamic range): > 100 db (typical a-weighted) polarity: positive signal at + input produce outward lf cone displacement input impedance: 20 k ohms balanced, 10 k ohms unbalanced input sensitivity: 85 mv pink noise input produces 90 dba output spl at one meter with volume control at maximum power: factory programmed for either 115v ~ hz or 230v ~ hz protection: rf interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse cabinet: vinyl-laminated mdf size: 7somos tienda fisica estamos a su orden tenemos punto de venta7” x 7” x cm x 172cm weight: 11 lbs
-
frequency response: 56hz-22khz crossover frequency: 3 khz low-frequency amplifier power: 40 watts high-frequency amplifier power: 30 watts maximum signal-to-noise (dynamic range): > 100 db (typical a-weighted) polarity: positive signal at + input produce outward lf cone displacement input impedance: 20 k ohms balanced, 10 k ohms unbalanced input sensitivity: 85 mv pink noise input produces 90 dba output spl at one meter with volume control at maximum power: factory programmed for either 115v ~50/60 hz or 230v ~50/60 hz protection: rf interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse cabinet: vinyl-laminated mdf size: 7somos tienda fisica estamos a su orden tenemos punto de venta7” x 7” x 10”; 192cm weight: 11 lbs
Libertador-Aragua (Aragua)
-
25-inch diameter, magnetically shielded with curved cone with high-temperature voice coil hf driver: 1-inch diameter, magnetically shielded silk dome frequency response: 100hz - 20khz (+/-3 db) crossover frequency: 23khz dynamic range (maximum signal-to-noise ratio): >80db (typical, a-weighted) input connectors: left and right line input connectors (rca) polarity: positive signal at "+" input produces outward low-frequency cone displacement dynamic power: 10 watts into 4 ohms (per channel) at 05% distortion input impedance: 10k ohms (unbalanced) input sensitivity: 100mv pink noise input produces 90dba output spl at 1 meter with volume control at maximum protection: rf interference, output current limiting, over temperature, turn on/off transient, subsonic filter indicator: blue power led ring around on/off/volume knob on front panel power requirements: v~hz, v~hz; powered via detachable 2-conductor line cord cabinet: vinyl-laminated mdf dimensions: 7100 verdes, usados en perfecto estado specs type: two-way desktop reference monitor lf driver: 3without packing) specifications subject to change without notice