POWER SAMSON SERVO 200 PARA DRIVERS O MONITORES DE ESTUDIO EN LIBERTADOR-ARAGUA

Power amplificador para monitores de estudio. GENERAL DESCRIPTION The Samson Servo 200 stereo power amplifier has been designed to provide robust, clean output with low distortion and wide dynamic range, along with the dependability demanded by the most professional audio engineers and installers. The convenient 2 rack-space design is compact, and yet there’s plenty of power available. With 2 x 66 Watts at 8O, 2 x 100 Watts at 4O, over the full frequency spectrum, from 10 Hz to 55 kHz. For mono applications, a Bridge mode links both channels of the amplifiers, thus providing even more single channel power, with a power rating of 200 watts into an 8 Ohm load. Input connections are available for both unbalanced RCA connections and balanced 1/4-inch TRS connections. For the outputs, the Servo 200 amplifier provides standard 5-way binding posts and 1/4” phone jacks. Front-panel controls and displays include a power switch with LED indicator, as well as independent left and right channel input level controls. To help you set the correct operating levels, the Servo 200 amplifier includes front panel Signal, Peak and Protection LED indicators. There's also a ten-segment VU meter to help you set a good operating level. Like all serious power amplifiers, the Servo 200’s internal electronics are based around a serious power- core, with an over-sized toroidal transformer and large extruded heat sink. To keep the Servo 200 amplifier running cool, the design employs twin internal wind